Everything we sell has full manufacture warranty. We are an authorized RC dealer. All items are Brand New in Factory Package w/Warranty | Visit our . for more great deals on our full line of RC Products, Or select a product category on left for more specific products of interest. Enter item# or name in the in the search box
|
|
|
|
|
|
|
Item Condition: Brand New factory sealed w/Warranty
Item#: DTXC3122
Condition: Brand New Factory Sealed w/ Manufacture Warranty
Authorized DuraTrax Dealer
DuraTrax 1/10 Element 3900kV Brushless System
Super Low Price for $99.95
Ships Priority Mail 2-3 Days Delivery
In stock ships with in 24 Hours!!!
The Element 3900kV Brushless System is designed specifically for use
with lightweight 1/10 scale 2WD off-road vehicles, including buggies,
trucks and short course trucks. The programmable ESC and powerful 4-pole
motor mount easily; after installation a simple throttle setup is all
you need to get going!
Some of the vehicles this system is compatible with include, but are
not limited to the DuraTrax EXT2 and Evader DT, Associated SC10
and B4.1 Buggy, HPI Blitz SC, Traxxas Slash SC, Rustler and Bandit
- Turn your 2WD RTR model into a serious racing machine!
- The 4-pole, 3900kV motor delivers more torque with greater efficiency.
- The ESC's high level of adjustability allows for fine tuning to enhance performance even more.
The 4-pole, 3900kV sensorless brushless motor
delivers more torque with greater efficiency, to meet the demands of
today's off-road vehicles.
Motor Specifications:
Dimensions:1.42 x 1.85 in (36 mm x 47 mm)
Weight (w/wires):6.54 oz (185.4 g)
kV (RPM/V):3900kV
Voltage Input:2S MAX
Shaft Diameter:0.125 in (3.175 mm)
Poles:4
Wires:13AWG Silicone, 6.89 in (175 mm)
Connectors:4 mm Male bullet connectors
ESC Programmable Features*:
Brake/Reverse Type – sets whether reverse is enabled or not, and how it is accessed.
Brake Amount – sets what percentage of available braking power is applied with full brake.
Reverse Amount – sets how much power will be applied in reverse, if reverse is enabled.
Punch/Traction Control – designed to
smooth high power starts and limit punch when you don't want 100%
battery power in every situation. The lower the setting the less
throttle change limiting there is; for softer acceleration or for
running on low-grip surfaces, raise it to a higher setting.
Drag Brake – sets the amount of brake
applied automatically at neutral throttle to simulate the slight braking
effect of a neutral brushed motor while coasting.
Dead Band – lets you adjust the
throttle sensitivity width at neutral. Smaller values make the
controller enter forward or brake/reverse with a smaller movement of the
throttle trigger for finer control.
Cut-Off Voltage – sets the voltage at
which the ESC removes power from the motor in order to maintain the
battery at a safe minimum voltage (LiPo), or to keep the radio system
working reliably (NiCd/NiMH).
Motor Timing – allows for lowering or
raising the timing advance to the motor to reduce or increase amp draw,
run time, motor/battery temperature and top speed and punch.
*ESC can be programmed manually, with the Castle Field Programming Card or through the Castle Link software interface.ESC Specifications:
Voltage Input:2S-3S LiPo (7.4V-11.1V); 6-10 NiCd/NiMH (7.2V-12V)
BEC:3A @ 2S input
Current Rating:up to 100A
Dimensions:1.81 x 1.38 x 0.79 in (46 mm x 35 mm x 20 mm)
Weight:2 oz (56.5 g)
Motor Wires:13AWG 5.3 in (135 mm), including female bullet connectors
Battery Wires:13AWG 4.72 in (120 mm), with Deans® Ultra Plug®
Receiver Wire:11.0 in (280 mm), with Universal radio connector
Motor Limit:on 2S/4200kV Max; on 3S/2800kV Max
Protections:low voltage cutoff, thermal protection
INCLUDES: 3900kV Brushless Motor, Element ESC, Connectors and Instructions
| International buyers please read this before buying any item from us: Any order shipped outside of USA is sent using United States Postal Service Parcel Post Service. Once shipped the average delivery time is estimated at 14-21 working days. However, sometimes there are delays caused by the US Postal Service and international customs agents that are outside of our control. Although rare, these delays can cause shipments to take several weeks before they arrive at their destination. For Combine Shipping please email us. Please note: I will not put less amount on custom papers, so please don't askInternational buyers are responsible for their customs fee. |
