|
The capsule slip ring is a standard, off-the-shelf series product, that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplified electrical connections.Using a 90 degree V-groove ring design for each ring, the ZSR-A provides smoother running, lower torque low contact wear rates than competitive slip ring.
Feature:
-Used advanced technology to design,lower consumtion.
-Compact design allows tremendous flexibility in dealing with system size restrictions:22.0mm outside diameter, and 19.53 mm to 42.53 mm length (depend on circuits).
-Can combine signal and power in same slip ring,completely satisfy 360 degrees of rotation
-Precision module provides long time maintenance –free operation(no cleaning or lubrication required);
Specification:
-Operation voltage:220 V/AC
-Operation speed:250 Rpm
-Circuits:12
-Housing Material:Engineering Plastics
-Operating Humidity: 60%RH or higher
-Operation temp.:-40℃~+80℃
-Operation current:2A per circuits
-Contact material:Gold plated ring-Gold plated brush
-Insulation resistance:1000 MΩ @ 500 VDC
-Lead size:150mm 30# AWG Teflon wire
-Dielectric strength:Between each circuit and all other circuits , ≥ 500 VAC @ 50Hz
-Electrical noise:70 milliohms max. tested@6 VDC, 50 milliamps when running@5 rpm
-Work life:Depending on speed and working environment
-Outside dia:22.0mm
-Flange dia.:44.5mm
-Length:25.43mm
Typical Application:
-CCTV Monitoring System ;
-Electrical test equipment;
-Medical equipment
-Robotics;
Package includes: | 
