Price Reduced!!!

need to sell...

Mänster Amplifiers

 

Li’l Mänster:

(pronounced with a British accent because of the tubes)

 

A true tone Mänster!!

 

 

Features:

 

•6BQ5/EL84 Push Pull Power

 

•Feedback Control: from clean to mean!!

Adjusts for a better modeling of all the famous amps on today’s market

 

•New High Quality Filter Capacitors

Mallory for main power supply and Roederstein for the preamp

 

•New High Quality Tone, Coupling, and Bypass Capacitors

Sprague Orange Drops and Mallory

 

•New High Quality Resistors

Allen Bradley and Wirewound

 

•Point to Point Hand Wired

with cloth wiring for that vintage look

 

•Solid State Rectifier

•8 ohm Speaker Jack

 

•1/4” Input Jack

 

•Great For Electric or Acoustic Guitar

and as a mono hi fi amp too

 

•NOS Preamp Tubes

12AX7: Motorola-distortion; 12AT7: RCA-phase splitter

(tested on an EMC model 213 tube tester)

 

•Vintage Silvertone Power Tubes

(tested on an EMC model 213 tube tester)

 

•Vintage Hammond Power Transformer

 

•New Hammond Output Transformer

 

•Solid Rock Maple Wood Base

with rope handles

 

•Gauranteed!! 

Full refund for 30 days

One Year: All repairs and parts

(except tubes and output transformer if you cook it due to not plugging in speaker)

As long as I am available:  all repairs

 

 

This was an RCA stereo amplifier that I gutted and rebuilt with my own unique design features.  The power transformer and chassis are the only original parts and the rest are new or NOS.  The original speaker jacks and RCA jacks were left in but are not connected.

 

This amp works exceptionally well for both electric and acoustic guitar!

 

The controls on the front are: (left to right)

     volume     tone     input

 

The back: (left to right) (the rca jacks don’t work, left in for looks)

     on/off     speaker output

 

The left side:

     feedback (for gain/distortion control)

 

The right side:

     power plug and fuse (2.5A/250v slow blow type)

    

There are no labels for the controls or switches which give this a cleaner look.  (Once you know them do you really need to see them?)  And stickers would only take away the boutique look.

 

 

About the feedback control:

 

This is a unique feature not found in other amps.  Negative feedback is used in ALL amps to control the distortion of the output tubes and stability to keep the amp from squealing out of control.  It comes from the speaker line and is injected back into the preamp.  Aiken Amps technical pages has a good description of this for anyone interested.  The Bassman uses about 12% of the signal, the Twin and Marshall-about 8% and Orange and Trainwreck Amps use about 5%.  This control allows the user to go from 22% to 1%.  More feedback allows the power tubes to breakup at lower volumes and get that highly sought after distortion.  Clean to mean!!!

 

Check out my other Mänster 50 Watt Amp...

 

Voltage Specs: