eBay
Battery for 1pack (5S) Brand-new Bosch Cordless 18V 1.5AH Repair Battery pack

adopting Samsung INR18650-15Q 18650 Cell  1500mah 3.6V Li-ion Rechargeable Power Battery Cell

With solder tabs to weld PCB!

 photo IMG_0483.jpg  

 

Specification

Rechargeable Li-ion Power Battery Cell
High power battery cell

High temperature resistance Paper Sleeve

 

Battery Cell Technical Parameter:

Cell Model: Samsung INR18650-15Q

Material: Li-ion

Voltage: 3.6V

Capacity: 1500mAh

Discharge Voltage: 2.50V

Discharge current: 0.2C

Discharging rate:

* Nominal discharge capacity: 1500mah

Maximum continuing discharging current: 18A

Cell Dimension: Height 65 mm, Diameter 18 mm

Weight: 42g

 

Battery Pack Spec.:

Assemble: 5S 18Volt 1.5Ah

with Solder tabs for Positive / Negative Pole and Outputs for PCB Connection

 

Work for: Bosch 18V Lithium series Power Tool battery pack, Ryobi 18V Power tools replace battery.

 

Notes:

Half-finished Battery Pack assemble with Brand-new Samsung Original Power cell, with solder tabs to facilitate buyer for DIY welding

There is a slight gap between the batteries (about 1/16 inch, or 1.5-2mm), We welding it a bit loosen as the original packs would have fixing plastic between each cell. You may fix it by yourself.

Battery pack not include PCB and outer shell

 

Perfect replacement and great cost saving when your old battery cell needs replacing but other inner electronic parts (such as the PCB) are still working good.

 

Read before ordering:

 

1. Please make sure your original PCB is in good condition and you are capable to weld the PCB onto the replace battery, because the package is not including the PCB and your power tool will not work without the original PCB or the PCB is already dead.

 

2. Please check and open up your old battery pack first before ordering and be sure you are capable and clear enough for how to finish the replacing.

 

3. Be aware of safety, avoid short-circuit and electric-shock when you do the repairing.

 

4. We are using brand-new Samsung cells and test every single cell before assembling, we choose the cells with good compatibility for total welding. You could check with the battery pack voltage when you first receive the package.

 

5. Replacing battery requires soldering skill and we are not responsible for any damage or injuries you may incur in the repair and we are not responsible for any damage on  your Power Tool.

 

 

How to know if my chips are still working good:

you could open up your battery pack, use a multimeter to measure all the cells' voltage, the readings should be between 3.6-4.0V for each single cell. Then all cells are good, the battery just has a faulty chip board, you need a new chip board, NOT this pack.

If the battery cell is a dead cell, the multimeter just read at 0-0.5V, then it shows a dead cell, if any of the cells has such low voltage, you may use this pack to replace the dead pack

 

Feel free to contact us for any in doubt in any time!

 

Our replace Pack you will receive:

Tabs sealed with insulation tubes, you could use scissors to take it off - But be aware of short-circuit when you are cutting it.

You may also use scissors to shape the terminal tab, use your old battery as a guide.

You could use multimeter to check the output for every tab

* Insulation shim will cover onto the battery pack for transportation. 

* Battery tabs will seal with Insulation tubes, you could use scissors to take it off - But be aware of short-circuit when you are cutting it.

* You may also use scissors to shape the terminal tabs!

 photo IMG_0476.jpg 

 photo IMG_0477.jpg


 photo IMG_0478.jpg 

 photo IMG_0480.jpg


 photo IMG_0480.jpg 

 photo IMG_0481.jpg




 


 photo conditionandterms.jpg



Shipping

  • We don't do combine shipping! Kindly check with separate shipping cost on "Shipping and Payments" page.
  • All shipments will have a tracking number to trace with.
  • Lithium Battery is Sensitive for air shipping, it is slower than normal items.
Reference shipping time:

Area

Standard Shipping Time

Delay if Backlogs

  Asia

20-25 Days

30-36 Days

  U.S.

28-30 Days

38-45 Days

  European

28-32 Days

38-48 Days

  Oceania

28-30 Days

34-35 Days

  South American

38-45 Days

55-65 Days

  Canada

28-35 Days

40-45 Days

  Russia

30-36 Days

45-68 Days

  Israel

40-52 Days

58-68 Days

  Italy

30-38 Days

48-55 Days

  Other Countries

30-38 Days

48-50 Days

* Delays may occur on and around holiday seasons and when backlogs are coursed by unforeseeable events and actions by customs.

  • If you do not receive the package over 30 days, kindly contact us and we will solve the problem for you.
  • This is economy International shipping from China, delays and backlogs may occur.
  • If you can't wait for long delivery, there's optional "Expedited Int'l Shipping" for selection or please order from local seller.
After-Sale Support
  • Every item has been tested by professional equipment before shipment.
  • Please Read Detail Item Description before order.
  • We do not responsible for quality problem caused by incorrect use, using wrong charger, refitting or welding.
  • We do not advise to mix fresh and half-used battery as this may kill the fresh battery in short time.
  • If the items are "Dead on Arrival", You may need to help for sending us more details.
  • Defected Information like Battery Voltage, Charging & discharging Status, Pictures are necessary in finding out the problem.
  • Communication is very important. Please trust us! We are happy to work with you in solving the problem.
Welding Service
  • We offer free-charge Welding Service!
  • You may send message to us if you need solder the tabs or Series / Parallel - Connected spot welding.
  • Its better if you could send us a drawing or picture by mail.
  • Remember to leave the message again on transaction by ordering that we will not miss the information.

 
Thank you for shopping with us.
Dispute and Escalated case can not help in solving the problem.
We hope you could contact us first before opening a case.
Remember: We are always here for help!