Inputs:
- 2 x DVI-D in 1
x out
- 1 x BNC Video in
- 3 x BNC YUC in
- 5 x RGBHV in
- 2 x BNC SD-SDI in
- RJ45
- PCMCIA
Optional Boards
5 BNC-Board
D-Sub15-Board
DVI/D-Sub15 Board
DVI-I Board
HD Data Wireless Receiver Board
HD-SD-SDI-Board
Network Board
Network Board
Warp- & Blending-Board
3D Sync In -
External lock / 3D Sync Out - Shutter glass control
- FastFrame™ technology
Hyper-Cooled
lamp module, one of our CoolTek™
Advanced Warp and Blend capabilities
Dual Flash Processing™ for 120 HZ 3D content
- VIDEO
& GRAPIC PROCESSING
- High bandwidth
digital & analog receiver with 10 bit A-D.
- Automatic
detection of interlaced video and implementation of 3:2 or 2:2
extraction as appropriate, with pixel based, motion adaptive
interpolation and auto cadence correction.
- Displayed image
frame locked to input with as low as 1 frame total latency.
- 24p and 1080p
native display.
- Image
enhancement for MPEG, Mosquito noise & color transients in
composite sources.
Geometry Correction
- Cornerstone,
Vertical & Horizontal Keystone, Pincushion & Barrel,
and Image Rotation.
- Non-linear
Warp adjustment by moving points on an interpolated grid.
Edge Blending
- Semi-automated
multi projector tiling
- Correction
for non-active pixels at the edge of the display.
Super Image Clarity
- Geometry
correction and Edge Blending implemented in single stage process,
retaining maximum image resolution.
Picture in Picture
- Two
sources can be displayed either one within the other (PIP), or side by
side, with original aspect ratios maintained.
ColorMax™
- Accurate
matching of projectors in tiled or blended applications.
- User
selection and storage of primary and secondary color targets.
-
High
Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency
- Pixel
mapped to the display.
- Dual
Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame.
- HDMI
1.4 for Side by Side, Frame Packing & Top Bottom formats.
- Dual
Flash Processing can be used to multiply the displayed frame rate for
3D sources (example 144Hz display)
- FastFrame™
Smear Reduction.
- Dual
Pipe processing: two sources in parallel for left and right eyes.
- Synchronisation
of active glasses or polarising switcher.
-
Projector
Controller Software
- Intuitive
user interface for network control
- Simultaneous
control of user-defined groups of projectors
- At-a-glance
monitoring of projector status
_______________________________________________________________________________________________________________
2000:1
contrast 30.000 lumens 1920 x 1080 pixel
FastFrame™
technology
Hyper-Cooled lamp
module, one of our CoolTek™
Advanced Warp and Blend capabilities
Dual Flash Processing™ for 120 HZ 3D content
Digital
Projection, Texas Instruments’ first DLP® partner and
the original innovator of the 3-chip DLP® projector, proudly
introduces the LIGHTNING 45 1080p 3D. When considered along with their
30,000 ANSI lumen brightness and contrast performance up to 2000:1, the
LIGHTNING 45-1080p 3D model is the perfect imaging solutions for the
most demanding large screen immersive applications, including: military
simulation, scientific visualization, medical, chemical and geological
research, product engineering, commercial cinema and theme park
attractions.
In
addition to the active 3D capability, the LIGHTNING 45-1080p 3D model
also include DP’s new FastFrame™ technology, a
revolutionary combination of hardware and firmware that vastly reduces
the artifacts and image blur typically associated with rapidly moving
displayed content. The benefits of FastFrame™ are especially
important for simulation environments such as commercial and military
flight training, and other applications where maintaining the visual
integrity of high-speed imagery is vital.
The LIGHTNING
45-1080p 3D projectors also incorporate Digital Projection’s
Hyper-Cooled lamp module, one of our CoolTek™ innovations.
Engineered with a proprietary, directional-flow reflector mask and
radial heat exchanger, the Hyper-Cooled module dramatically improves
projector thermal characteristics and extends reflector life and lumen
maintenance. In turn, these operating benefits provide a significant
reduction to the long-term cost of ownership, while also enhancing
component reliability
Other
key benefits of the LIGHTNING 45 WUXGA 3D:
Utilizing Digital
Projection’s new, advanced electronics, all Lightning 45
models provide the user with advanced Warp and Blend capabilities,
including the ability to make extensive geometric warp correction for
screens with complex geometry. Superbly capable edge blending and
multi-projector tiling is provided by way of high bit depth processing
that ensures a seamless, contiguous image can be created from multiple
projectors. Additionally, end users can choose to utilize the
Lightning’s onboard tiling function by assigning each
projector a position within an image matrix. The video processing then
automatically extracts the appropriate segment of the input image and
enables blending for the appropriate edges.
Also included are
Digital Projection’s exclusive 3D advances that further
extend the remarkable flexibility engineered within each Lightning
display. Applications with 120 Hz native sources utilize the High
Bandwidth input, eliminating the need for frame doubling. For 60 Hz 3D
applications, Digital Projection’s built-in Dual Flash
Processing™ enables distribution of 3D content via 60 Hz
formats by frame-doubling the signal within the projector, producing
the low flicker image characteristics of a native 120 Hz source without
the infrastructure costs associated with distributing and switching
ultra-high bandwidth signals.
LIGHTNING 45-1080p
3D Pro Series II projectors – ultra-powerful display systems
for major 3D events and Immersive large screen applications –
bringing the precision of Digital Projection to every venue
Additional
lamps without VAT for 4300€ / $5900 (NEW)
and 2750 € / $3780 (refurbished)
Projector
is sold as DEMO-Stock with 0hours on the clock (2014 model), which includes
a 36 months return to base warranty (except Asia).
Price does not include lens.