1. Course Introduction |
26. Feed Rate Exercise |
2. CNC Simulator |
27. Spindle Rotation |
3. G-Codes |
28. Tool Change Operation |
4. G-Code Structure |
29. Tool Coolant |
5. Part Dimensions |
30. Plane Selection |
6. Tool Bit Settings |
31. Selecting Units |
7. Rapid Motion G00 |
32. Work Coordinate System |
8. Linear Interpolation G01 |
33. Multiple Work Parts |
9. Absolute Values G90 |
34. Center Drill Introduction |
10. Incremental Value G91 |
35. Center Drill Exercise |
11. Tool Bit Height |
36. Drilling Introduction |
12. Slot Sequence (i) |
37. Drilling Exercise |
13. Slot Sequence (ii) |
38. Drilling Cycle |
14. Slot Sequence (iii) |
39. Retract to Plane |
15. Slot Sequence (iv) |
40. Retract to R-Value |
16. Clockwise Circular Interpolation G02 |
41. Introduction to Spot Face and Counter Bore |
17. Counter Clockwise Circular Interpolation G03 |
42. Spot Face and Counter Bore Exercise |
18. Circular Slot I J K Method |
43. Part Project Exercise (i) |
19. Complete Circle |
44. Part Project Exercise (ii) |
20. Circular Slot Exercise (i) |
45. Part Project Exercise (iii) |
21. Circular Slot Exercise (ii) |
46. Part Project Exercise (iv) |
22. Circular Slot Exercise (iii) |
47. Part Project Exercise (v) |
23. Spindle Speed Introduction |
48. Part Project Exercise (vi) |
24. Spindle Speed Exercise |
49. Part Project Exercise (vii) |
25. Feed Rate Introduction |
50. Part Project Final Design |