Picture 1: What you see above is what you
get. Package comes with
-
RFID
Access
Controller with RS485 networking function
-
Cables
-
One RFID Card
(click icon to buy more)
PRODUCT DESCRIPTION
Offered here is a
ONE
(1) new good quality
RFID Access Controller & RFID Card that permits door access via password or RFID card
or both. This console can work either as standalone or by connecting to a
computer PC (Windows) via RS485 to RS232 adapter (not
included). You don't have to attach it to a computer in order to use
it, set it up or program it. It can store 25,000 records when standalone,
and the record will not disappear even when the unit is not powered for 10 years
or more!
It can support access control. You can set the door to open at different
time and by certain number of people. It will raise an alarm when someone
tries to destroy it or wrongly close/open the door that violates the
pre-programmed instructions in the console. It supports RS485 and RS232
(via RS485/RS232 converter
not included) communication interface to connect to a computer PC. The
maximum number of this console that can connect to a computer terminal is 254
units.
When connected to a computer terminal, the computer terminal with privileged
password can remotely change the setting in any of the access controllers that
is connected to it. It
shares many similar functions as our fingerprint module (click on this icon:
to learn more) except that it does not have fingerprint function and has RFID
card function instead.
With your computer, you can manage user ids/RFID into major groups, each groups having different settings as to
the time/date access privileges. After setting up, you don't need to
connect the console to your computer to run it, since it can run independently
of the computer.
The beauty of this console is that
it can be connected to two pieces of waterproof external RFID mini card reader
(optional, click on the icon
to buy it, or click this icon
to
buy the combo package) at the same time via the Wiegand 26 port found at the back of the console. If you only connect one external card reader,
you can put the external card reader on the outside of your door, and put this
"RFPSRFY88CD" console on the inside of your door.
If you attach two external waterproof RFID mini card reader, then the RFID function on the
console will be turned off since the two external card reader will take over the
RFID card reader job.
1) All-purpose and wide application. The
product is integrated with PWD keyboard, single door controller, time recorder
and double door controller.
2) Advanced technology, stable and reliable.
All input and output pots can prevent shock from static and power. It has strong
anti-interference ability and has power failure resisting design. The PCB board
has moisture proof and corrosion protection and can adapt to different rough
weather.
3) Dynamic definition, flexible application. One
build-in card reader (EM or Mifare), two sets of W26 interface, two sets of
sensor input, two sets of button input, two sets of relay output, one set of
bell port and one set of RS485 communication interface.
Re-define the IO interface. For example, W26 port will be defined as W26
standard output or input, the relay can be defined as door controller, bell or
alarm output, the sensor can be defined as fire alarm signal.
Please note that the two set of relay input and
output means that you can control two separate electric strikes/deadbolts/doors
separately from one single controller. However, we do not advice buyer to
do that because it may cause instability to the controller. This is
especially true if the two separate electric strikes/deadbolts/doors are more
than 30 meter apart. So if you must make full use of both relays, make
sure the two separate electric strikes/deadbolts/doors are not too far
apart.
4) Support hardware upload data on-line
5) Includes door close/open status monitoring
function, so that you can monitor online whether your door is open or close.
Will work with this electric strike that comes with monitoring function:
If you prefer one without networking function, then click on this icon:
If you prefer a
wireless fingerprint access controller, then click on this icon
and
KEY
FEATURES:
Options to open door includes:
1. Password Only
2. RID Card Only
(RFID token (
or
)
you can register and deregister various RFID Card/passwords ( i.e. if you need
to deactivate someone's access)
3. Password & RFID Card
/token
(click icons to purchase)
TECHNICAL SPECIFICATION Working voltage:
AC/DC 8~25V
Power consumption: <1W
Data saving: >10 years (after power failure)
Total user entry records: 25000 pieces (adjustable)
User capacity: 2500 user id
LCD resolution: 122x32 DOTS
Build-in word base: 16x16 national class two character base.
Communication mode: One RS485
Relay output: Two
State input: Four
Card reading type: EM compatible or MIFARE
Induction distance: 4 to 15cm
Networking capacity: 254 sets
Working temperature: -20celcius to +70 celcius
Storage temperature: -25celcius to +85celcius
Working humidity: 20%-90%
Wiegand 26 port: Two.
Dimension: 119mm*87mm*15mm
We also sell RFID Controller with built-in
Ethernet LAN TCP/IP Interface (no external adapter needed) here:
|