SPECIAL FOR YAESUADAPTER!8-PIN MICROPHONE PLUG TOXLR STYLE JACK!(Please see my feedback) For adapting the Yaesu microphone system to thehigh quality broadcast balanced microphones requiring the 3-pin XLR style jack (Also available are other manufacturers transceiver microphone plugs adapted to the same 3-pin XLR style jacks). FOR ALL YAESU TRANSCEIVER MODELS WITH THE 8-PIN MICROPHONE PLUG. This cable is professionally assembled under a high powered stereo viewing system, using a special new 8-pin Microphone plug and a new XLR 3-pin jack and a shielded, 2-wire plus ground audio cable, about 6 feet long. Both connectors are assembled with heat shrink tubing over each soldered pin. Then a second layer of heat shrink is added over the complete pin assembly to further isolate the contact pins from the metal jacket. A third layer of heat shrink tubing is added internally for strain relief for the cable.
This cable is now industrially rated and protected from heavy use. All my cables are made this way. UNDERSTAND... this cable is intended to plug into the 8-pin Microphone Jack. The microphone is wired to pins 8 & 7. The shield ground is wired to pin 5. Each cable is independently and thoroughly tested with my FT-950 and my broadcast style microphone, an Electrovoice DS-15, to insure they work perfectly. Most Yaesu transceivers will work perfectly with this cable when used with a dynamic broadcast microphone. (I also have the 8-pin & 10-pin Mini-DIN cables for linear amplifier control available under a different EBAY listing.)
As with all plugs and jacks, they must be aligned and inserted carefully. Be sure to line it up properly before pushing it fully home.
See my EBAY store for Now Shipping Worldwide! We will ship WorldWide at slight additional cost. See this site for all my other auctions http://www.ebaystores.com/id=13270308 Also available at separate listings in my EBAY STORES... http://www.ebaystores.com/id=13270308 DataCharts, (operational information), in both SMALL and LARGE sizes. ALL AVAILABLE ON EBAY! ALL SMALL DATACHARTS ARE PRINTED ON BOTH SIDES! Every SMALL DataChart is also available in an EXTRA LARGE size, laminated, at 11" by 17". printed on one large single side, with Heavy Photo Paper Stock and laminated. or hang it on the Hamshack wall to proudly display your rig as a WORK-OF-ART. are normally printed on one side for instant informational use in front of the rig. ***The large DataChart, (only), can also be printed, by email request only, on both sides for larger, easier to read print and for those of us with tired eyes. is desired when ordering the extra large DataCharts. Need Cables? We make cables! All kinds of cables! 8-PIN-MIKE, XLR, BNC, RCA, PHONO, MINI-PHONO, MOLEX, ETC. Various peripheral equipment and linears such as, Ameritron, Our cables, wherever possible, use only stranded wire and multiple layers of shrink tubing for fracture resistance. If you don't see what you need, email me. We will research your special cable |