1. The DN-2600F can be easily mounted on a standard 19-inch rack.
2. Improved visibility thanks to a large fluorescent display, self lighting buttons and disc holder illumination.
3. Improved operability thanks to a large jog/shuttle dial and track select knob.
Functions
1. Shockproof function protecting against external vibrations
2. Auto Level Search / Instant Start
3. Pitch Bend (Button & Jog)
4. Seamless Loop
Playback can be looped between any two positions with no break in the sound. Two loop start points (A-1 and A-2) can be set.
5. Hot Start / Stutter
Playback can be started instantaneously from points A-1 and A-2.In the stutter mode, the disc is only played while the button is pressed.
6. Sampler
The sound of the CD can be sampled and played for approximately 15 seconds. The loop, reverse, pitch adjustment, playback level adjustment and key adjustment functions can be used with the sampled sound.
7. Digital-Scratch
This function allows scratching in a way similar to analog discs.
8. Effector (Filter, Reverb, Flanger)
Three different effector functions can be used to create a variety of effect sounds.
9. Brake / Platter
The playing speed can be gradually lowered to play and stop discs with a sound similar to that of analog discs.
10. Next Track Reserve
The next track to be played can be selected so that playback continues with no break in the sound.
11. Memo
Up to 300 sets of such data as the cue point, loop A/B points and pitch can be stored in a permanent memory (one set of data per track).
12. Key Control / Key Adjust
Key control function for adjusting the playback key. In addition, the key can be adjusted automatically when the playing pitch changes so that the key remains the same.
13. End Monitor
The ends of tracks can be monitored.
14. Program / Random playback
Up to 25 tracks can be programmed, and programs for up to six discs can be stored in a permanent memory. Random playback is performed for the discs in both disc holders.
15. Fader input
16. Servo Auto Stop function for Spindle Motor / Disc Holder Auto Close
17. Preset function for setting functions according to the usage purpose
SPECIFICATIONS
GENERAL
Type: Twin mechanism compact disc player with wired remote control
Disc type: Standard compact discs (12 cm and 8 cm discs)
Dimensions: Player unit: 482 (W) x 88 (H) x 252 (D) mm (without feet)
18-31/32” (W) x 3-15/32” (H) x 9-59/64” (D)
Remote control unit: 482 (W) x 132 (H) x 40 (D) mm (without feet)
18-31/32” (W) x 5-13/64” (H) x 1-37/64” (D)
Installation: 19-inch rack mountable
Player unit: 2U
Remote control unit: 3U
Weight: Player unit: 6 kg (13.23 lbs.)
Remote control unit: 3 kg (6.614 lbs.)
Power supply: U.S.A., Canada and Taiwan R.O.C. models: 120 V AC ±10%, 60 Hz
European models: 230 V AC ±10%, 50 Hz
Power consumption: 26 W
Environmental conditions: Operational temperature: 5 to 35°C (41 to 95°F)
Operational humidity: 25 to 85% (no condensation)
Storage temperature: –20 to 60°C (4 to 140°F)
AUDIO SECTION
Quantization: 16-bit linear per channel
Sampling frequency: 44.1 kHz at normal pitch
Oversampling rate: 8 times
Frequency response: 20 to 20,000 Hz
Analog output
Output level: 1.9 V
Digital output
Signal format: SPDIF
Output level: 0.5 Vp-p 75 ½/ohms
Load impedance: 10 k½/kohms or more
FUNCTIONS
Instant start: Within 20 msec.
Variable pitch: 10% range: ±10% or more
16% range: ±16% or more
Pitch bend: ±32% or more
Sampling length: 15 sec.
Search precision: 1/75 sec. (1 subcode frame)
Max. scan speed: Over 20 times normal speed
Max. memory steps: 300 steps