eBay

TESTED WITH THE DR. HANNEMAN COMMON CENTS SYSTEM - DBI 4.31/68

Up for sale is a new imported IM6 Graphite 4 Piece, 4 wt, 9 Foot fly rod kit.   The kit includes blank, reel seat with end cap, snake guide set, 6 inch cork grip, winding check.

These quality blanks were purchased directly from the manufacture with no brand name attached.  It is a high gloss opaque purple color.  It has a fast action.  Each section is 28 1/2 inches long. The bottom of the butt section has an Outside Diameter .353 of an inch. The tip top diameter is size 3.5(1.44mm). 

The rosewood burl insert is round. The reel seat picture is of a representative sample of what you will get. It is not the actual seat you will get. Color variation does vary a little. The fixed hood will be recessed into the cork grip. The reel seat weighs 0.8 of an ounce by my digital shipping scales. This reel seat is uploading. It has knurled double locking rings with rubber inserts for tightning. The outside diameter of the insert is .640 of an inch. The inside diameter bored through the reel seat is .387 of an inch. The outside diameter of the recessed hood is .822 of an inch. The total length of the reel seat is 3 7/8 inches. It comes with an titanium plated end cap.

Also included is a Titanium Carbide plated snake guide set. There are 16 items in this set counting the winding check. For a 9 foot rod you have enough guides if you want size 1 as your smallest guide. There are also enough guides if you want size 2 as your smallest. They are GUNMETAL GRAY in color. The inserts on the stripping guides are zirconium.   A set consists of a hook keep, 16mm Stripper, 14mm Stripper, 5, 3, 3, 3, 2, 2, 2, 2, 1, 1, 1. The tip top is a size 3 1/2 X 8mm. The feet on the guides have been ground. Buhr's on the underside definitely need to be removed.

 The reverse half wells cork grip is AAA grade and 6 inches long. The mortised end that will accept the reel seat has an ID of .830. The hole bored through the cork is .396 of an inch. The grip has a plastic shrink wrap protective covering.

 

 VIEW MY OTHER ROD BUILDING COMPONENTS

The butt ends of all sections are not painted the last 1/4 of an inch. A ferrule wrap is needed to give the rod a finished look. 

Delivery Confirmation is free and is included with PRIORITY MAIL shipped to a US address. This is a NO RESERVE auction.

WE COMBINE SHIPPING. PLEASE DON'T PAY UNTIL YOU ARE DONE BIDDING ON OUR AUCTIONS AND HAVE RECEIVED AN INVOICE SHOWING YOUR ADJUSTED SHIPPING. PLEASE LET US KNOW THAT YOU ARE BIDDING ON MULTIPLE ITEMS SO WE KNOW WHY WE HAVEN'T RECEIVED PAYMENT.

Domestic and International shipping is actual shipping plus $3.75 for the heavier cardboard shipping tube.

INTERNATIONAL BIDDING/SHIPPING WELCOME.

 


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.