Funkmodule von Hope Microelectronics zeichnen sich durch ein sehr gutes Preis/Leistungverhältnis aus und lassen sich relativ einfach über eine SPI Schnittstelle ansteuern.
Hier ein Auszug der Eigenschaften aus dem Datenblatt:
- Fast PLL lock time
- High resolution PLL with 2.5 KHz step
- High data rate (up to 115.2 kbps with internal demodulator,with external RC
filter highest data rate is 256 kbps)
- Automatic antenna tuning
- Programmable TX frequency deviation (from 15 to 240 KHz)
- Programmable receiver bandwidth (from 67 to 400 kHz)
- Analog and digital signal strength indicator (ARSSI/DRSSI)
- Automatic frequency control (AFC)
- Data quality detection (DQD)
- Internal data filtering and clock recovery
- RX synchron pattern recognition
- SPI compatible serial control interface
- Clock and reset signal output for external MCU
- 16 bit RX Data FIFO
- Two 8 bit TX data registers
- Standard 10 MHz crystal reference
- Wakeup timer
- 2.2V ? 3.8V power supply
- Low power consumption
- Standby current less than 0.3uA
- Supports very short packets (down to 3 bytes)
Weitere Funkmodule finden Sie in unserem Ebay Shop.
|
Allgemeine Eigenschaften: |
Maße LxBxH |
16 x 16 x 4,2 mm |
Pad Abstand |
2,0 mm |
Betriebstemperatur |
-40 - 85°C |
Elektrische Eigenschaften: |
Betriebsspannung |
2.2V ? 3.8V |
Stromaufnahme RX |
12 mA |
Stromaufnahme TX |
23 mA |
Standby Strom |
0,3 µA |
Sendeleistung |
5 dBm |
sonstiges: |
Modulation |
FSK |
Schnittstelle |
SPI |
Verpackung |
ESD geschützt |
RoHs konform |
ja |
|
Datenblatt |
|
|
Code Beispiel |
|
|
|
|