eBay
Click for the BBB Business Review of this Recreational Vehicles - Equipment, Parts, Supplies in Memphis TN

This add-on Custom built, Our Deluxe Model fan, was mainly sold through our  web site, we are now offering it here on eBay. 1000's  and 1000's sold through web site, why not allow our eBay customers the same fan with special features and shipping.  As fast as the orders are coming in, sometimes we need a little more lead time to fill and ship all orders. 


Since this fan will not ship flat in an envelope type package with the ON-OFF switch in place.   I will leave the mounting of the switch from it's location loose. This way I can offer better shipping and you can stick switch through the hole an tight the nut, that's all.  It will be no wiring needed, just tighten the nut once the switch is stuck through the pre-drilled Hole.  Of course if you want it already mounted the shipping will be a little bit more due to size of box needed. 

A very simple and quick way to increase your refrigerator inside cooling, simply install a add-on evaporator fins fan to any model.

This unit does not have to be wired to the interior light, but can if your model has DC voltage present with door closed. Why take a chance with mis-wiring to damage PC Board controlled light DC power. Interior light power comes from PC board.  It's not that it will harm the PC Board, but if wired wrong or shorts out, it feeds back to PC Board. Not ours, we fuse our fans to save PC board in case something goes wrong. 

Take a look at the picture to compare fan size of OUR fans compared to Competitors small fans. I'm not saying the competitors fan is bad or will not cool like stated.  I think they are very good, what I'm saying customers need more for the price paid.   Why pay for something an not get, like larger fan for better air flow for max cooling ability, independent ON-OFF switch so you can control, without removing fan as some competitors states or turn off refrigerator to stop fan.  What if you want to keep fan running just to vent for drying out the insides before putting up for storage. What if you are boon dock camping an you want to conserve battery, ours just flip the switch to OFF.  On competitors you must remove the fan and reinstall again for use.

These 2 fans are 1/2 inch larger than competitors, not the metal base.  When you pay competitors the same price for a larger fan but get a small fan moving less cold air, That's like paying for something, but not receiving.  

 

Make your refrigerator cold not just marginally cool.

 

Here are just a few of the benefits 

  • Inside temps are even from top to bottom
  • Your fan will allow the refrigerator to maintain colder temp though out top to bottom
  • Thermostat does not have to be set so cold
  • Fan can be wired to interior 12 vdc light or any 12 volt DC power source inside or the outside, our fan has it's own fuse for safety.....
  • Fan has a off-on switch for independent control, no need to remove to turn off like competitors units
  • Fan can be wired to any 12 vdc power when your refrigerator has no useable interior light, our fan has it's on safety fuse.
  • Heavy gauge Aluminum frame with 2 Stainless Steel cables, double push on clips for mounting
  • Fan can be used to dry out refrigerator after the refrigerator is turned off
  • Easy push on mounting clips that's Stainless Steel.  No alligator spring clips here only our  Standard models have the Alligator style clips (like competitors) 
  • No removing of fans to turn OFF like come models.
  • Some competitors wants to say our draws more current, (.003 more) they say not good during dry camping.  At least you can turn ours OFF, theirs run till battery is completely dead or the refrigerator is turned OFF. 
  • No drilling of any kind to mount Fans
  • Saves a weak cooling refrigerator, allowing it to cool food to a save temperature
  • Fans fits any RV Brand or Model, with or without DC power to Refrigerator from a small single door to the large side by sides to Norcold 4 Door units.
  • Mounting of Fans to evaporator will save money due to refrigerator cools faster.
  • Keeps Fins from heavy frost build up
  • No need to defrost
  • A great add-on fan for the Marine or Truck refrigerators to cool like the RV'ers.
  • With some models this Fan wiring was designed to be a Plug n Play install.
  • We only use piggy back spade terminals only so you never quick slice or cut any original wiring.
  • One year replacement warranty
  • A Great gift for a friend

Some of the newer Refrigerators in RV's do not have a light or unable to use light for the quick hook up, so we have designed the fan to be  wired either to light or to any 12 vdc source without any fan modifying.    It will come with all terminals needed, so you can wire as needed.

Great safety feature with this add-on fan, from others of this style, it does not have to be wired to the interior light, which will prevent, if fan shorts out burning up your PC board of most RV refrigerator used. We use only piggy back spade terminal so no quick splice connectors or sticking a raw loose wire behind a terminal as competitors say to do.  No original wires or wiring cut with our fan install.

This Dual Fan frame is same color as the inside Evaporator Fins giving a more attractive inside from having odd stand out color fans like competitors.

The fan is not the standard small fan used by competitors, check out the size.

Each fan size is 2 3/8 x 2 3/8 with over all frame width of 5 1/8 and height of  4 1/8 and thickness 1/2,  A fan CFM 14.78- Amp draw 0.1 per fan motor. 

 If, competitor Fans  pull less current, but only by .003 amps.  If that's a concern, when the battery gets low, flip the switch to off, competitors keeps on running down battery till it's removed.  Which would be easier, switch it to OFF or remove fan to shut it OFF.

If my calculation is correct.  Dry camping with our fan  say drawing .2 (min. amp draw)  would be over 600 hrs or more for battery use.  Question: How many camp that long? That's almost 3 weeks.

Notice the LARGER blades, but also notice each blade width is small so the high RPM can move more air without the high amp draw or load to move a large blade. It's like the Turbines of a Jet Engine, small but fast.

 

The cable not only are used to mount, they also are used as Vibration Damper with stainless steel push on grounding clips.

The electrical wire is about 72 inches long, giving you enough wire to work with, not only is the wires longer, it's doubled and protected in a sleeve.  

If at any time more details are needed, send me your questions.   If any wiring help is needed, send me your request.

 Also note the color of the fan frame, matches the inside refrigerator fins to give more of an appearance it's part of the refrigerator- not an odd color unit looking like an add on.