eBay
Product Description
The Panasonic MT920 Capacitor is a factory replacement capacitor for many Seiko and Pulsar Kinetic watches.

Fitment Guide
Models:
  • Seiko Kinetic
  • Seiko A.G.S.
  • Pulsar Kinetic
Movement Numbers:
  • SEIKO 5M22
  • SEIKO 5M23
  • SEIKO 5M25
  • SEIKO 5M42
  • SEIKO 5M43
  • SEIKO 5M45
  • SEIKO 5M47
  • SEIKO 5M62
  • SEIKO 5M63
  • SEIKO 5M65
  • SEIKO 7M22
  • PULSAR YT52
  • PULSAR YT57
  • PULSAR YT58
Seiko and Pulsar movement numbers are included in the first 4-5 characters before the dash(-) in the case number located on the watch caseback.  The movement number is also usually stamped on the movement.  See box in image for example of "5M42."  Please contact us if you have any questions before your purchase.



Installation Guide
  1. Warning: DO NOT use a battery tester/voltmeter on these capacitors, as this may affect the ability of the capacitor to hold a charge.
  2. Open caseback
  3. Note position of capacitor and remove spent capacitor, noting position of capacitor electrical contacts
  4. Insert new capacitor in same orientation as spent capacitor
  5. Ensure that caseback gasket is properly seated and lubricated and replace caseback
  6. For Kinetic, rotate watch rotor approximately 400 times or wear watch until the second hand(or charge indicating hand) no longer double skips and watch operates normally
  7. For Solar, place watch in strong sunlight or wear watch in sunlight until the second hand(or charge indicating hand) no longer double skips and watch operates normally
  8. If your watch does not operate normally, double check the capacitor installation, charging method and duration, or visit your local watchmaker for movement inspection