Ultrasonic Fuel Injector Cleaning Service
Optimum fuel economy when wanted - Optimum horsepower when needed.
We (Injectortune) clean, test and refurbish nearly all makes and types of petrol fuel injectors, idle control valves & cold start injectors using several state-of-the-art machines and testing
apparatus. This apparatus allows us to diagnose faulty injectors under simulated engine operation - we can sometimes even bring faulty injectors back from the dead!
With over fifteen years' experience you can be sure your injectors are in safe hands.
Car, motorcycle/scooter, marine and mechanical injectors are all a routine service for us. We have cleaned and serviced thousands for customers all around the world.
We fit new o-rings, filters, pintle caps and other service parts where possible (a small additional charge is made for hoses and clamps on hose fed petrol injectors and o-rings for side fed injectors where available and requested). We stock service parts for 90% of all petrol injectors including Bosch, Weber, Keihin,
Sagem, & JECS. We are able to offer a service for all injector types including MFi, GDi, (though regrettably cannot service BMW DI injectors from N54 and similar engines, or any diesel injector). Please
contact us for an estimate).
All electronic petrol injectors serviced are returned with a concise before/after test data report which includes flow rates, spray patterns and electrical continuity
(an example can be viewed below). Please do email us to discuss both your individual needs and how our service can help you.
Our service can:
Restore peak horsepower
Restore fuel economy
Restore engine smoothness
Improve acceleration
Improve cold starting
Improve poor idling
Reduce engine hesitation
Reduce exhaust emissions
Reduce engine wear & tear
And SAVE YOU MONEY!
The following video demonstrates our work in greater depth.
YouTube Video Link
More detailed information about our service can be found here.
Typically, after 50,000 miles of use a set of injectors will have a 6% flow rate imbalance, leading to both lost power and fuel efficiency. Furthermore, a 5 micron
build-up of dirt is common after only 120,000 miles - causing as much as a 25% reduction in flow rate and a heavily distorted flow pattern.
A 15% reduction in both horsepower and fuel economy is expected after only 60,000 miles of driving under normal operating conditions, which increases to a maximum of
about 22% at 150,000 miles.
There is no better way to reduce your fuel expenditure than to fit injectors ultrasonically cleaned and serviced to 'as new' condition. 'Fuel Saving' Magnets, 'Vortex Generators' and 'Ecotek valves' are 'fool's gold' with impossible scientific claims that no maker has been able to substantiate in court. Even in-tank cleaners are near
useless by comparison with ultrasonic cleaning.
This is an example of our petrol injector test report.
Purchase instructions
Postage is £9 flat rate for petrol injectors (next working day, insured up to £500). Injectors are posted back the next working day after they have been serviced, with a
typical turnaround being 2 working days from receipt.
1. Purchase the correct number of petrol injectors to be serviced
2. Await email with delivery address and postage instructions.
3. Post your petrol injectors to us with your name, address and PayPal receipt.
4. Receive, refit and benefit from having injectors which function 'as new'.
Do review our feedback from satisfied customers!
Please contact us prior to purchase if you wish to use an alternative means of payment. We do not accept cheques.
Beware!
We sent a set of injectors to a rival eBay seller offering a cheaper 'cleaning' service. We were shocked by the standard of the 'service' we received, though they
support the old adage that 'you get what you pay for'.
Beware eBay users selling 'cleaned' injectors without offering a service equivalent to our own.
They are most likely fraudsters.
Good injectors bought for cash - Please email to
discuss prices.
|