This listing is for one lot of TWELVE new highest quality high carbon steel 5 inch (132 mm) pinned scroll saw blades.  The blades will be shipped loose, the picture shows them laid out for illustration only.  Optional storage tube is not included unless 50c additional is paid, see below.

You can also buy additional lots for $11.50 each, please follow the directions below.

If you want more than one lot, or if you want storage tubes, please buy but DO NOT PAY.  Please email us what you want, and we will send you an invoice.

OPTIONAL BLADE STORAGE TUBES - These are quality rigid plastic tubes with replaceable caps, as shown in the lower picture.  They are convenient for safely storing and keeping the different grades separate, and they hold 12 blades comfortably.  They are offered for 50c additional each.  The blades and storage tubes must be paid for in one combined payment to qualify for this offer.

These blades are made in USA by The Olson Saw Company and distributed by ZimbyoProducts.  They are available in 8 grades.

These blades fit newer Dremel, Craftsman, Ryobi, Delta and other scroll saws that use pinned blades 5 1/4 inch total length, 5 inch between pins.

If you want blades for the older Dremel Moto-Shop, Craftsman Hobby, Delta 15" Hobby, Emco Lux Hobby and other scroll saws that use 3 inch (76 mm) pinned blades, 3 inch total length, 2 3/4 inch between pins, or if you want plain end (not pinned) 5 inch blades, please click on "3 and 5 inch scroll saw blades" in the Store Categories to the left, and select from the listings that will appear.

You can specify any combination of the 8 grades. Please specify the grades you want by separate email. If you do not specify, we will assume you want our standard selection which is 4 of #1 fine/thin, 4 of #2 medium/thin, and 4 of #3 coarse/universal blades.

#1 fine/thin blades (Olson No. 427P) have 25 regular teeth per inch, 0.010 inch thickness and 0.070 inch width for fine thin cuts and sharp turns in wood and plastic up to 1/2 inch thick.  Can also be used to cut non-ferrous metals (copper, zinc, brass, lead and aluminum).

#2 medium/thin blades (Olson No. 424P) have 18.5 skip teeth per inch, 0.010 inch thickness and 0.070 inch width for thin cuts and sharp turns in wood and plastic up to 1/2 inch thick.

#3 coarse/universal blades (Olson No. 411P) have 15 regular teeth per inch, 0.018 inch thickness and 0.110 inch width for wallboard, pressed wood, wood, felt, paper and bone.

#4 medium/regular blades (Olson No. 425P) have 18.5 skip teeth per inch, 0.014 inch thickness and 0.070 inch width for regular cuts and sharp turns in wood and plastic up to 1/2 inch thick.

#5 medium/thick blades (Olson No. 405P) have 20 regular teeth per inch, 0.018 inch thickness and 0.100 inch width for thicker wood and plastic.

#7 coarse/reverse blades (Olson No. 420RP) have 9 skip teeth per inch, 0.018 inch thickness and 0.100 inch width with 5 reverse teeth for a smooth splinter-free finish on both sides of wood and plywood 1/4 inch thick or more.

#8 coarse/hook blades (Olson No. 410P) have 7 hook teeth per inch, 0.018 inch thickness and 0.100 inch width for aggressive cutting of wood up to 2 inch thick.

International buyers are welcome.

Shipping is free in USA, $1.50 to Canada and $2.50 Worldwide per lot of blades.

We ship the next business day (International twice weekly).