2-Part Liquid Polyurethane Urethane Foam 2 LB Density- 16 lb kit
THIS ITEM CAN NOT BE SHIPPED OUTSIDE OF THE US
2 LB Density-16 LB Kit(1.8 Gal)Polyurethane Foam
Our 2LB density marine foam is recommended for void filling in nonstructural applications. This product can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy. This foam has been tested in accordance with U.S. Coast Guard Regulation # 33 CFR 183.114 . This foam is approximately 95-98% closed cell which resists absorbing water, however continuous water submersion can eventually lead to loss of buoyancy over a period of years. We recommend this product strictly for flotation applications. If looking for a liquid foam for sculpting or casting we recommend using at minimum our 3LB or 4LB density. U.S. ONLY! The 4 lb kit (1.7 Qt) covers approx 2 cubic. The 16 lb kit(1.8 Gal) covers approx 8 cubit ft
Product Information:
Free Rise Density: 2.0 lbs cubic ft.
Expansion Rate: Approx. 25-30x Liquid Volume
Buoyancy (flotation): 60 LBs per Cubic Ft.*Physical Properties:
Parallel Compressive Strength: 40 psi
Tensile Strength: 30 psi
Shear Strength: 30 psi
Flexural Strength: 50 psi
--------------------------------------------------------------------------------
This two-part liquid, expanding rigid urethane foam is a closed cell, pourable foam, which will resist the absorption of water. The densities shown refer to the weight per cubic foot of expanded foam (12" x 12" x 12"). Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting. This product can be poured in multiple layers with excellent bonding between layers. All expansion rates and times given are temperature critical. Temperatures below 75 degrees F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 degrees F or above. Accurate measuring of these products is extremely critical. Find our selection of measuring containers here. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes The lightweight foam is commonly used for filling voids, filling under decks and practically any other flotation or insulation application. Higher densities are used for architectural castings, support applications and has virtually an unlimited number of potential uses.
--------------------------------------------------------------------------------
Kit Sizes
Kits are sold by weight size packaging.
Here is how they compare to volume
4LB Kit = Approx 1.7 quarts
16LB Kit = Approx 1.8 gallons
80LB Kit = Approx 9 gallons
The contents of this product combined with the intructions provided are based on data considered to be scientifically accurate and is intended for use by persons having technical skills, at their own
discretion and risk. Since conditions of use are outside our control, we can not assume liability for results obtained or damage incurred due to misuse, nor can we
assume customer liability.
Conditions of use can include: Temperature- Proper Measuring- Thourough Mixing- Mixing time- Cleanliness of utensils- Applications etc.
Terms: Sale is final at the end of the auction. Please email with any questions before you bid. Payment is expected
within 5 days of closing of the sale. I accept PAYPAL Buyer
is responsible for all shipping costs (We ship primarily USPS-UPS for heavy items). Insurance at buyers request unless otherwise
stated and highly recommended for breakable/crushable or expensive items. I reserve the right to cancel any bids with negative
or no feedback rating. If the pictures on the auction do not match the item description there could be a hosting error. Please do not bid and notify me. Thanks and
*HAPPY BIDDING*
