1.Painless treatment focus RF energy at the correct position,compared to other radio frequency technology.RU+5 uses low energy and high frequency,safe and effective

2.Aim at the skin surface and deep location,using a complex method to control the different currents and energy,direct access to the different skin layers,the effect is visible

3.Selectively targeting fatty tissue,to avoid heating other fat,to achieve the fastest treatment effect

4.With the most useful 40KHZ ultrasonic cavitation system

5.Color touch screen

How to use

Please see the User Manual to see how to set up and use this machine

• Operation

1.Connect the accessories to the host.

①Insert RF 2 polar operating head to [4]
②Insert RF 2 polar operating head to[5]
③Insert M38high-frequency waves operating head to[6]。
④Insert 8 polar vacuum operating Head to[7]。
⑤Insert foot switch to[8]。
⑥Insert M80 ultrasonic to [9]

2.Insert power line to [11]，open the General power switch to[10],enter interface as (Fig1).

3.insert IC card correctly, otherwise enter interface as (Fig2).

• Face treatment

1.In interface such as (Fig 1),click the "2 polar for face"to enter interface as (Fig 3).

2.click“”and“”regulate output intensity of RF:1(weak)~3(strong).

3.click on“”and“”to set working time,facial care about 20-30 minutes.

4.Click on "START" begin to work,click " pause" stop to work.

5.Apply gel on face around skin, move in circle, the electrode probe move from inside out,operating on both side,right and left, one side over to start to other side, and must lower the intensity accordingly as less fat on forehead and eyes.Do not let gel into eyes.

6.When it finished click “EXIT”.

• Body treatment

1.Click “tri-polar RF for body” in interface as (Fig 1), enter interface as (Fig 4).

2.Adjust output intensity:1(weak)~10(strong).

3.Setting treatment time about 20~30 minutes for each part.

4.Click “start” to work, click " pause" to stop.

5.Put enough gel on treatment body part recommended high intensity on fat stock up part.

6.When it finished, click “EXIT”.

• M38 slimming operation

1.as the screen shows (Fig1),click the “M38” key and get into the work as (Fig5).

2.choose the working mode: P1~P9 (pulse),P10(last).

3.adjusttheoutputintensify: 0.5W(weak)~5.0W(strength).

4.adjust the photon mode: synchronous/turn off .

5.Click “Time”on the screen and set working time (20 min every part).

6.click the”start”key to start the machine.

7.clean the parts and applied gel on fleshy parts(eg. gel or essence) .The amount depends on moving flexibility of the ultrasonic slimming head.Beautician hold the ultrasound head to move slowly on skin and do not stay unmoved on any part of your body while using ultrasonic cavitation slimming head.

8.adjust the needed mode, operational time and output intensify according to the treatment. After finish, click the “exit”.

9.Clean the leftovers with hot towel, use warm towel to clean the ultrasonic cavitation slimming head.

• M80 slimming operation

1.As the screen shows (picture 1),click the “M80” key and get into the work as the picture 6 shows.

2.choose the working model:P1~P4 (pulse),P5(last).

3.adjust the output intensify:10W(weak)~50W(strength).

4.Click “Time”on the screen and set the working time (10~15 min every part), then applied gel on fleshy parts(eg.abdomen,hip,thigh) The amount depends on moving flexibility of the ultrasonic slimming head.

5.Click”start”, put the foot switch under your feet, step on to start working, move away for pause.

6.Beautician hold the ultrasound head to move slowly on skin, in circle or beeline repeatly, the other hand push the fat towards the ultrasonic cavitation slimming head.

7.Do not use on back, avoid using on bones.

8.Do not use on uterus part when women do abdomen care. Abdomen treatment during menstruate should be avoided.

9.The machine will pause automatically if the setting time is over.

10.Clean the leftovers with hot towel, use warm towel to clean the ultrasonic cavitation slimming head.

• Use RF caution

1.Applied enough gel on skin need treated.

2.Do not stay unmoved on any part of your body while using ultrasonic cavitation slimming head, do not stay on bones and used in the human body heart throat and eyelids. If the skin is sensitive or becomes unhealthy, the strength of the power should be adjusted down.

3.The daily treatment should be within 30 minutes.

4.There will be ultrasonic only when you step on the foot switch.

5.Do not make the RF electrode stay on any part without moving. The electrode can not allowed to be placed under the state of no-load to avoid the damage caused by high heat.

• 8 polar vacuum

1.Click 8 polar “RF”vacuum,enter interface as (Fig 7)

2.Adjust output intensity:0(weak)~10(strong).

3.Adjust vacuum intensity: 10KPa(weak)~100KPa(strong).

4.Choose vacuum mode as (Fig 8);P1~P6,PE

① P1~P5 vacuum mode has default times, Need to adjust inspiratory, releasing air time.
② P6 mode has no adjust function.
③ Can set vacuum mode by yourself (0.1S~3.0S).
④ When finish setting, click return.

5.Adjust times (about 20 minute).

6.Nursing parts daub wipe essential oils or massage oil, click"start".Set time arrived, instruments will be automatically suspended, press any key to continue working.

• Vacuum note

1.Need to apply oils or massage oil on the skin as to convenient to move; for another, avoid the skin because of dry and feel pain.

2.Adjust the negative pressure suction depends on the strength of the guest when, should be determined by weak gradually stronger.

3.Do not operate on the broken skin.

• Other

Click "setting" in interface as( Fig 1)

①Click “ multimedia ” enter interface as (Fig 7),insert USB to [1],insert headphone to [3].
②Click "basic setting",enter interface as(Fig 8)

Notes “advanced setting” is for manufacturer

1.Wear insulated gloves during operation.

2.Do not wear any aglet, both for the beautician and the users.

3.The electrode probe must be fully in contact with skin.

4.Do not make the RF electrode stay on any part without moving.keep it moving on skin slowly.

5.Skin around eyes and forehead is very thin,the RF output intensity should be relatively weakened.

6.Clear the filter cup after use.

Cleaning Methods:Put some paper at the bottom of the filter bottle,rise the valve with your fingers, let the oil leak.

Applied Range

1. Promote tissue metabolism.

2. Repel the cellulite

3. Tighten the skin

4. Strengther the skin elasticity

5. Fat dissolving

6. Body shaping

Friendly Tips

Not suitable for people like:

1.People with heart disease or high blood pressure , or configured cardiac pacemaker.

2.Patients with acute inflammation, asthma , deep vein thrombosis, thyroncus, cancer.

3.People with hemorrhagic disease, trauma or who is bleeding.

4.Pregnant women.

5.Medical Plastic parts, or parts with artificial in filling inside.

6.People with metal inside the body(include metallic tooth).

7.Patient with skin inflammation or with edema.

8.People with an abnormal immune system.

9.Numb or insensitive to heat.

Item Units and Pictures (what you see what you get)

Host X 1
Power line X 1 
User manual X1
Bipolar RF handle for eyes X 1 
Tripolar RF handle for body X 1
M38 ultrasonic handle for facial X 1
M80 ultrasonic handle X 1
8 polar RF&vacuum X 1
Foot switch X 1
Accessory frame X 1
White fast connection sealing ring X 5
Hexagonal screws X 8
Hexagon wrench X 1

FOR ALL OF OUR CLIENTS

NOTICE: There are many new brand name of similar item in the market recently, although their price are really cheap, but the quality of their products are also terrible:

1. That factory only produce as a lower price as they can, they won't care about the quality.All our item is pass the ISO9001 quality certification

2. Have visit and purchase the item samples from some other supplier, many samples are in bad quality. After compare samples again and again from different supplier, finally we provide this top-quality item for you at lowest price.

3. You can purchase a high quality and safety machine, but please don't waste the money for a cheaper but a low quality machines. We only sell top-quality item. Base on the top-quality, then we will beat our price as lowest on eBay.

4. We keep a good relationship with the supplier, so that we can get the stable and reliable stock for our client.

5. We only sale the top-quality machine, we can provide the reasonable price since we have fight with the supplier as a lowest cost as we can.

SHIP from USA , DUTY FREE
DHL or FEDEX with TRACKING NUMBER

Retail price for this item is 4200USD. Now you only need to pay less than half of retail price and you will also have the fully guarantee for 24 months.