Product Description
DP Signal LCD Controller Board (with touch keyboard) + T-CON board (used for LM270WQ1-SDA2) replacement kits for 27.0inch 2560*1440 LCD LM270WQ1-SDB3 LM270WQ1-SDE3
---Adapter: DC +19V 4.7A. ---It is very complicated for the LCD lm270wq1. The backlight interface and the signal interface are different for the different suffix. ---I have only the DP driver kits for LM270WQ1-SDA2. But the LCD model for a few guys is not SDA2. So I figure ou the way to use my DP driver board to your LCD. ---Please replace your T-CON board to the one that is used for LM270WQ1-SDA2.Then the driver kits can be used for all 4 lane eDP LM270WQ1 LCD. |
The touch keyboard function description: | |||
1 | LED | 4 | LCD Brightness DOWN |
2 | Power on / off | 5 | No use |
3 | LCD Brightness UP | Size | 76mm*7mm |
---The LCD features can be looked up via the following link: |
http://www.panelook.com/modelsearch.php?panel_part_number=LM270WQ1-SDB3 |
---The DP board+LCD cannot be turned on if the 2560x1440 DP signal isn't input to the DP board from your PC/laptop. ---The resolution of graphic card will be equal or above 2560*1440. Or else, the DP+LCD cannot be powered on. ---All the signals will be transmitted from the DP port on the PC/notebook to the DP board, then to the T-CON board at the LCD's back, then to the LCD. ---I have the 27inch LCD and each DP board has been tested. I confirm that the DP board is a good one. ---If the LCD only works at 640x480 resolution , your T-CON board is a bad one. You have to change it. ---Power Supply DC connector: 5.5mm*2.5mm |
INTERFACE FUNCTION DESCRIPTION: | |||
1 | Power Supply(19~24V 4A) | 4 | Keyboard |
2 | DP Input | 5 | Backlight(4Pin) |
3 | DP/eDP Signal Interface |
The Related Items for the Controller Board: |
---19V DC Adapter: http://www.ebay.com/itm/191261343253 ---DP to DP Cable: ......2.0m / 2.18yd ---Mini DP to DP Cable: ......2.0m / 2.18yd |
Package includes: |
>---1× LCD Controller Board work for LM270WQ 27inch 2560*1440 LCD Panel ---1× Signal Cable ---1× Touch Keyboard with Wire ---1× T-CON board for LM270WQ1-SDA2 |