This is a brand new pair of Sealed Beam Hi / Low head light inserts in 6" x 4"
These are 3 pin for Hi/Lo beams.
This is 1 pair of lights (2 lights). Typically cars with 6x4 lights have a hi/lo outer set and a dedicated hi beam inner set - these are the two hi/lo beam outers.
They are 60w high beam and 40w low beam which is normal and so no wiring upgrades needed.
12 Volts - I also sell the 24v version here on ebay
Actual measurements are :
They typically fit Landcruiser 62 and 80 series, Trans Am, a lot of 70's american cars, Dyna, Hiace, Ford Trader, Mazda and a lot of trucks with rectangular lights and anything else with 6x4 rectangular headlights.
These are an all rounder wide angle and good distance light. Fabulous for seeing the edge of the road as well as the road well ahead.
The size is 6" x 4" rectangular and they suit all such applications. The only other sizes out there are 7" x 5" so if you go and have a measure it will be pretty obvious to you which size you need.
They are a direct replacement of your normal sealed or semi sealed head lights.
Fitting is dead easy. Remove the outer metal retainer (4 screws) and the light falls forward into your hands. Just unplug the old and plug in the new. Re-position the light and screw in the retainer and you are done. There is no need to remove the grill or headlight surrounds.
These are excellent all rounder lights. The light is entirely made of glass. The glass reflector has a super reflective silver film on the inside. The curved glass lens is rippled vertically on the inside so as to disperse light sideways.
These are sealed lights, which means they have a built in globe. Low beam is 55W and Hi Beam is 60W. No need to change wiring. They plug straight in.
One cool idea is to run these as inners as well as outers and have all 4 working in low beam and all 4 working in high beam. To get low beam to work on the inners just requires tapping the inners into the low beam power for the outers and an inexpensive relay (also in my ebay store) would make sure a fresh 12V for each pair of lights rather than both sharing the one source.
Being sealed they are totally waterproof. It is a vacuum inside, which means no moisture and condensation and no rusting. The big advantage of these sealed beams is that they can never take in water.