Remember my motors are all NAME BRAND stepper motors made for heavy industry,

NOT the cheap non-name brand motors made for retail, those stepper motors heat up, make lots of noise and don’t last.

They usually have NO removable connection wires, there wires come right out of the motor, be aware of the ALL BLACK MOTORS.

In the USA shipping is $6.00 for the 1st motor and $2.00 for each additional motor.

CNC ROUTER ROBOT REPRAP MAKERBOT

NEMA 17

Sanyo Denki


PIN5 / RED  = A

PIN3 / BLUE= B

PIN4 / YL      = A-

PIN2 / ORG  = B-

PIN1 / WHT  = COMMON

PIN6 / BLK   = COMMON

Description

Volts:  Up to 36 volts

1.8 deg  200 steps/rev when full-stepping

2.0 ohm motors

Shaft is 4mm diameter

6 wire connection for uni-polar or 4 wire connection for bi-polar


Current per Phase:          1.2A unipolar  .85A bipolar
External Depth:                39mm
External Length / Height: 42mm
External Width:                42mm

Frame Size:                     NEMA 17

Holding Torque:               unipolar 42.48 oz/inch  (0.3N-m)  bipolar 59 oz/inch (.42N-m)


THE ATTACHED VIDEO THIS REPRAP OWNER IS USING THIS MOTOR YOU CAN SEE ONE ON THE PRINTHEAD