Fastrax Electric Roto Torque Start System with Force and SH Backplate


No More Pull Starting!

Start your nitro Force/SH engine effortlessly using this new torque start with powerful 550 motor. Insert the 6mm shaft with hexball tip into the new torque-slip design backplate to start your engine. The backplate features a specially designed 'slip' unit to avoid possible damage should the engine lock up.

Suits all SH / Force engines except the Big Block .46.

Requires: 7.2v Stick pack & charger (not included)

Contents:
  • 1x Rota Starter
  • 1x 6mm hexball shaft
  • 1x Force/SH engine backplate

    • Backplate Dimensions:
  • Distance between centres of backplate mounting holes is approximately 27.5mm.
  • Centre hexagonal housing size is 12mm, measured across the flats.

    • Important Information: All electric starters are designed for intermittent use and normally a short period of up to 5 seconds is all that is required to start an engine. Repetitive use even for short periods should be avoided. and sufficient time should be allowed for the starter to cool down. Continuous use will generate excessive heat which can cause damage to the switch, motor and wiring and is to be avoided. If an engine fails to start then do not persist with the starter but investigate the possible reasons e.g. faulty glow plug or glowstart, flooded engine, fuel starvation, incorrect carburettor settings, etc.