Thank you for visiting our store. We would like very much to be your connector provider.
Your purchase will consist of Ten (10) RFC Model 63-8410 PL-259 Type Crimp type connectors for LMR-400, RFC-400, Belden 8214, 9913 and other 400 series coax cables with the larger diameter center conductors. These may be used with the standard RG-8, RG-213 as well as 8214, Belden 9913, LMR-400 and others. Optionally, the Silver Connector Tips may be soldered. Included with each connector is a 1 ft length of 3/4-inch diameter of Therm-O-Sleeve, Polyolefin 2:1 heat shrink tubing which gives a professional and attractive appearance to your connector installation. the 12-inch length is sufficient for the 10 connectors using approximately a 1-inch length for each connector. A photo of this heat shrink tubing is shown installed on ECOFLEX 10, a highly flexible, 50-Ohm, low loss RG8 Type LMR-400 equivalent. Personal, friendly and fast shipping service is also included.
Also included with your purchase is our product information sheet with mechanical drawing and recommended cable stripping dimensions and crimp die sizes for crimping both the coax shield and the center pin. We suggest using our RFC Model 63-DL-801K tool in auction number 150992891853 and using die cavities .429 for the body and .129-inches for the center pin. The center pin may be crimped, soldered or crimped + soldered.
We also offer an economically priced, professional, ratcheting type crimp tool with optional dies for crimping this and other coax sizes in another EBAY listing.
Crimping is fast becoming the choice for RF Connector fitment. No worries about overheating and distorting the temperature sensitive, gas injected polyethylene dielectric in the new low loss cables when soldering.
Look closely at the fit & finish of this connector. We've provided a photograph of the actual connector, not a stock, representative or generic photo or drawing.
Generic, stock or representative photos, copied from manufacturers websites, are often used when selling inferior items, or an entirely different item.. Why would a seller not photograph the actual product he wants to sell?
Mechanical: Superior quality construction consisting of an 85-micron nickel plated brass body and crimp ferule for lifetime brilliance and luster, and a 30-micron, silver plated brass center tip for low contact resistance. The insulator is DuPont™ Teflon® dielectric known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of frequencies and temperatures.
Electrical: 50-Ohm impedance, variable, DC to 300-Mhz (Commonly used up to 512-Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from -65C to 165C (-85F to 329F). RoHS Compliant by Directive 2002/95/EC.
We gladly combine shipping with our other items.
USA SHIPPING INFORMATION:
FREE via USPS Ground Advantage with 2-5 day normal delivery time.