Digital control built on the #1 control valve in the US

Patented piston design injects air into the system to maximize oxidation

Regenerates based on days passed to ensure proper media operation

LCD display and touchpad controls for extended control & efficiency

At a glance information and simple interface

Control each portion of the regeneration cycle

Ensures a long lasting valve

For filter systems - DO NOT USE for water softeners or to replace control valves on systems that don't currently use an air injection control head...a larger tank will be recommended.

Replace your old, worn out, or non-functioning control valve with a new, efficient digital metered control valve made by Fleck, the #1 manufacturer of control heads in the U.S.

The Fleck 5600SXT is one of the best control heads found on water softeners in the US, it's easy LCD display and touchpad controls make it easy to use. The advanced features and the reduced water use provide top of the line results. Backed by a 5-year warranty, this head will provide long lasting performance as well.

Timer control regenerates based on timed basis, allowing you to set regeneration regeneration frequency to a number of days or to specific days of the week. This is ideal for filter tank systems that need regular backwashing to prevent media fouling and flow restriction.

Air injection piston creates an air bubble in the top of your tank so that when the water passes through it, contaminates are more easily oxidized. Therefore, the removal capacity of medias is greatly increased. If you are upgrading from a standard head to an air injection head, a larger media tank is recommended, or use less media in existing tank.

Digital SXT controller provides advanced options through an easy to use LCD display and touchpad controls. Digital controller reduces the time used for backwash, minimizing down time and reducing water use. At a glance display shows you the current time of day and how many days remaining until regeneration, as well as letting you know if a regeneration is scheduled. Full regeneration cycle control allows you to adjust all the parts of regeneration cycle for maximum control and performance.

Simple, time tested design uses a piston to control water flow. This allows for reliable performance and reduces maintenance cost and time.

Quick connecting bypass or yoke connections make it easy to disconnect the system from your plumbing should the need arise. NOTE: This head REQUIRES a Fleck yoke or bypass valave, if you do not have one you will need to add one in the order options above

Complete service manual included with basic installation, service, and maintenance instructions as well as parts diagrams

5-year manufacturers warranty ensures against defects and provides quality assurance.