4X100W Class D Audio Amplifier Board Combo Kit Starter
Combo Product Number: 1AA929
This is a combo kit combined with a 4X100W Class D Audio Amplifier and a Delta 24V 350W PMT Panel Mount Power Supply . This kit helps you build your own system in the most convenient way with full potential released of this amplifier. Meanwhile the total cost is lower than the seperated ones which makes it also a high cost-efficient option.
Amplifier Board
Brief Introduction: - Welcome to use this self-made 4*100W audio amplifier board which is a perfect class-D architecture integrated TC2000 and STA508 chips to achieve the single-channel 100W power output. With high efficiency, it especially is available for the outdoor venues where power supply is always in consideration. Moreover, integrated with TC2000 and STA508 chips of Tripath, this board also supports four-channel amplification and can be powered by any DC power supply ranging from 10V to 30V, which can be used to drive any 4Ω or 8Ω passive speakers.
- Net weigt:510g/18oz
Features: - A perfect " Class D" archiitecture
- Frequency response:20Hz to 20KHz(±3dB)
- Single end audio signal input
- Over temperature protection
Specifications:
Parameter | Condition | Min. | Typ. | Max. | Supply Voltage | - | 10V | 27V | 30V | Input Sensitivity | Pout=100w | - | 520mV | - | Quiescent Power (W) | Vmute=0V VCC=30V | - | 12.6 | - | Standby Power (W) | Vmute=5V VCC=30V |
| 6.6 |
| Efficiency | Pout=100W | - | 90.3% | - | Input Impedance | - | - | 10K ohm | - | Load | - | 3.2 ohm | 4 ohm | - | Gain(dB) |
|
| 32 |
| Operating Temperature | - | 0℃ | 20℃ | 70℃ | Storage Temperature | - | -20℃ | 20℃ | 105℃ | Thermal Shutdown | - | - | 150℃ | - |
Applications: It is the ideal solution for any sound reinforcement installation or application needing an affordable compact PA system. - Background Music Systems
- Vending machines
- Lifts
- Interactive kiosks
- Home DIY
- Car audio
Benefits: - Mounting holes facilitate installation and fixing
- Several wiring methods facilitate connection:RCA Socket (Default),Terminal Block(Optional)
- Excellent design of the power ports which allows you to connect multiple amplifier boards in series (Terminal Block Optional)
- Excellent heat dissipation eliminates the requirement of an extra heat sink
Note: - The accessories might be a little different from what you've seen on webpage since the accessories you received might be from different batch. However, it won't affect your use. Sure Electronics assumes no liability for any ambiguity caused by the product photos.
Documents: Keyword:
Power Supply
Product number:PS-SP11298
Output: Input: Mechanical: Safety/Environment: |