This listing is for one
This is an expansion shield for the Arduino MEGA 2560 R3 and Arduino MEGA 1280 (or clones).
It not only allows for ease of development and prototyping but also makes for a convenient way to connect up many external devices/sensors as a finished product.
This shield plugs on top of an Arduino MEGA and makes available the 53 digital and 15 analogue inputs/outputs with Vcc and GND.
Every connection has a set of 3 pins: GND, Voltage and Signal making it easy to wire up and connect to external peripherals.
It supports all peripherals that would be connected to a MEGA such as Bluetooth, SPI interface (for SD card module and other modules), 6 pin ICSP connector. Please Note: You may require right-angled headers pins
It incorporates a RESET pushbutton, POWER ON LED and connection to an external power source via a screw terminal block for providing power to servos, relays, and other attached peripherals.
A jumper pin determines what power source (5v) the board should use for attached devices.
All "V" pins on the board is supplied by:
Jumper on - +5 comes from the Arduino and therefore its use should NOT exceed 300 ma
Jumper off - +5 comes from an external supply supplied via the terminal block.
Board Dimensions: Length 101mm Width 54mm
Height (without any connections but including on-board pins) 20mm
It not only allows for ease of development and prototyping but also makes for a convenient way to connect up many external devices/sensors as a finished product.
This shield plugs on top of an Arduino MEGA and makes available the 53 digital and 15 analogue inputs/outputs with Vcc and GND.
Every connection has a set of 3 pins: GND, Voltage and Signal making it easy to wire up and connect to external peripherals.
It supports all peripherals that would be connected to a MEGA such as Bluetooth, SPI interface (for SD card module and other modules), 6 pin ICSP connector. Please Note: You may require right-angled headers pins
It incorporates a RESET pushbutton, POWER ON LED and connection to an external power source via a screw terminal block for providing power to servos, relays, and other attached peripherals.
A jumper pin determines what power source (5v) the board should use for attached devices.
All "V" pins on the board is supplied by:
Jumper on - +5 comes from the Arduino and therefore its use should NOT exceed 300 ma
Jumper off - +5 comes from an external supply supplied via the terminal block.
Board Dimensions: Length 101mm Width 54mm
Height (without any connections but including on-board pins) 20mm
Useful Links:
http://arduino-info.wikispaces.com/SensorShield to see the output pin layout.
http://arduino-info.wikispaces.com/MegaQuickRef
http://arduino-info.wikispaces.com/SensorShield to see the output pin layout.
http://arduino-info.wikispaces.com/MegaQuickRef
We only sell high quality components from reputable sources.
Everything we sell is UK stocked ready for immediate dispatch.
All components are professionally packaged.Items dispatched almost always before 5pm if order & payment is made before 3:30pm.Any questions, please send us a message.
Please do not raise a 'case' before messaging us and giving us an opportunity to respond and resolve any issues.
Click here to visit our eBay shop