FOTGA DP500IIS DSLR 15mm Rod Rail Baseplate + DP3000 M3 Matte Box Swing Away KitDP500IIS DSLR 15mm Rod Rail Support Baseplate Introduction: This FOTGA DP500IIS adopts new design. It is completely made of metal-still sturdy enough for holding follow focus,camera,matte box,etc,just as FOTGA DP500II always. It is composed of a bottom cheese baseplate,a top baseplate for camera, 2pcs 25cm length 15mm diameter rods. The bottom baseplate and top camera mount baseplate are mounted on the 15mm diameter rod by separate railblock,which makes them able to work independently.It will be easy to adjust the balance between them. The cheese bottom baseplate is with 11 1/4"-20 screw hole and 2 3/8"-16 screw holes. you can mount it on to tripod or a quick release plate. It allows you mount it onto your stabilizer.There is also 2 1/4"-20 screw holes on the railblock of it. The top camera mount baseplate is with a quick-release railblock,easily to mount and detach from the 15mm rods. Instead of a little 1/4" screw bolt,this baseplate adopts a big thumb screw,which enable you to mount your camera on the baseplate much easier and quicker. There is also a 1/4" screw hole by the size.You can connect a device with 1/4" screw on it,such as magic arm,etc. You can also install a hand strap grip with your camera mounted on this baseplate rig. Improved blue screws.There is spring inside,which makes the nut able to life and relocate to the right position you want it to be. Specifications: Complete rail system is made of Metal Color : knobs is blue and all other is black Rails length : 25cm Rails dia : 15mm Rails center-to-center distance : 60mm Tripod mounting plate size : 80mm x 38mm camera mount plate size : 108mm x 42mm Screws thread : 1/4 & 3/8 FOTGA DP3000 M3
Swing-away matte box In still photography and video, a
matte box is a device used on the end of a lens to block the sun or other light source in order
to prevent glare and lens flare. It performs essentially the same function as a lens hood and
also mounts in front of the lens, but usually includes adjustable fins called French flags. Suitable for: Package including: 1x FOTGA DP500IIS DSLR 15mm rod rail cheese baseplate 1x FOTGA DP3000 Matte box (M3) 2x French Flags 2x Side Flaps 2x Filter holders 4x Donut size at 103mm, 76mm, 64mm, 51mm
About
Payment We accept PAYPAL only for safety and
easy. About
shipping * Ship to worldwide * We will ship the item within 1 business
days
after clearance of payment. * Shipment is from Hongkong via hongkong post. It
usually
takes about 4-15 business days to US. * We only ship to
confirmed
order addresses. Your order address MUST MATCH your Shipping
address. Return
& Refund * You have 7 days to contact us and 30 days to return
it
from the date it was received. Shipping cost is bear by both seller and
buyer
in half. * All returned items MUST BE in the original
packaging
and you MUST PROVIDE us with the shipping tracking number and
specific
reason for the return. * We will refund or resend you after we have received
the
returned item * We will bear all the shipping cost if the
product(s)
is (are) not as advertised. About
Guarantee * 12 months Manufacturer`s limited Warranty for
defective
items (excluding items damaged and/or misused after receipt).
Accessories
come with a 3-month warranty. * Defective items MUST BE reported and returned
within
the warranty period (and in the original packaging, if possible). You
must
tell us what the defect is and give us your order number. WE DO NOT REPAIR
OR
REPLACE ITEMS WITH AN EXPIRED WARRANTY. You agree to all of the above-listed policies upon
ordering
on ebay About
Feedback We maintain high
standards
of excellence and strive for 100% customer satisfaction! Feedback is
very
important We request that you contact us immediately BEFORE you give us
neutral
or negative feedback, so that we can satisfactorily address your
concerns.
|