DESCRIPTION

2x 8mm hubcentric spacers with chrome longer radius bolts.

Those are 5x100 and 5x112 pcd combination spacers.

The spacers are suitable for most vehicles produced by the Volkswagen, Seat, Audi, Skoda group.

 A 8mm spacer will give an overall track increase of 16mm when fitted to both sides of an axle.

These spacers are priced and sold per pair (2x spacers).

***Please read below***

1) Please look at your wheels before you buy them as they need to have chamfered cut out on the inside to allow the spacers to fit (all genuine vw wheels has that).

It has to be 69mm min width (please see 2nd last picture).

This extra bevel on the spacers is needed for the hubcentric ring to be allocated as the spacer is to thin to do it without it.

2) The max amount of  the hub surface from the face of the discs needs to be 11mm (please see last picture).

We have found that some cars have more then that and the spacers are snapping while the wheels are tightened.

If in your case you have more then 11mm, you will need to file the excess of the hub or use bigger spacers.

Please check our other spacers if you need different sizes or cone bolts.