Universal Vari-Lift Gas Struts x2
A pair of strong adjustable gas struts with M8 ball studs - perfect for
making up boot lifters, opening doors, windows, trailer hatches etc.
Adjustable force means you can reduce the force of the gas strut to suit
your own application (you cannot increase the force). See instructions
below. - Zinc plated gas strut ends
- Powder coated gas strut
- 800N (80KG) maximum lifting force per strut - ADJUSTABLE USING ALLEN KEY
- 4 x M8 10mm ball studs included (see other listing for kit with M6 ball studs)
- 55cm length between ball studs when open
- 19.5cm stroke approximate
- 8mm shaft with 15mm diameter body
- 2 gas struts per listing
PLEASE NOTE THAT NO RETURNS ARE ACCEPTED IF THE STRUT HAS HAD ANY GAS RELEASED.
HOW TO ADJUST GAS STRUT FORCE
To
reduce the force of the gas strut use a 2mm Allen Key to quickly and
briefly unscrew the screw in the brass end on the gas strut. Only let a
small amount of Nitrogen escape (0.5 - 1sec hiss) and quickly shut the
screw (do not over tighten). Re-test the gas strut and repeat
de-gassing until desired force is achieved. Once the desired force is
achieved you can tighten the screw more firmly to prevent it coming
undone.