![](https://sc04.alicdn.com/kf/Ha76b61babaab499c932588310ba871d9f/200248169/Ha76b61babaab499c932588310ba871d9f.jpg)
Industrial Turbos
•Professional Manufacturing •Strict Quality Control •Superior PerformanceCOMPRESSOR SIDE | A/R: | 0.7 |
Inlet: | 4" | |
Outlet: | 2.5" | |
Wheel type: | Billet | |
Blades: | 11+0, GTX style | |
Wheel Inducer: | 63.5mm | |
Wheel Exducer: | 84mm | |
Trim: | 57 | |
Extended Tip: | Yes | |
CENTER SECTION | Bearing Type: | Journal Bering |
Thrurst Bearing: | 360 degree | |
Seal Ring: | Stepped gap seal ring on turbine end | |
TURBINE SIDE | A/R: | 1.06 |
Inlet: | T3 standard | |
Outlet: | Garrett style 3" V-BAND | |
Blades: | 10+0 | |
Wheel Inducer: | 68mm | |
Wheel Exducer: | 62.3mm | |
Trim: | 84 |
1. is this a garrett turbo turbo?
This is a brand new aftermarket turbo, we are the manufacturer of this turbocharger.
2. is there other turbine housing options for this turbo?
Yes, we have 6 different turbine housing options for this turbo. Please check the list below. We DON'T have T4 turbine housings available.
Turbine housing options | ||||
---|---|---|---|---|
Ref. Part # | Inlet type | A/R ratio | Outlet style | status |
740902-4 | standard T3 | 1.06 | 3" 4-bolt | In-stock |
740902-5 | standard T3 | 0.82 | 3" 4-bolt | In-stock |
740902-6 | standard T3 | 0.63 | 3" 4-bolt | In-stock |
740902-10 | standard T3 | 1.06 | 3" V-Band | In-stock |
740902-11 | standard T3 | 0.82 | 3" V-Band | In-stock |
740902-12 | standard T3 | 0.63 | 3" V-Band | In-stock |
3. what can I benefit from billet compressor wheel?
The biggest advantage of billet compressor wheel(vs cast compressor wheel) is it is machined on a 5-Axis mill, the wheel can be designed much more aggressive to get better aerodynamic. The nose and hub can be designed significantly smaller to allow for a greater blade diameter, the blades can be machined much more complicated to increase blade surface area, which can flow more air into the engine.
4. do you have ball bearing gt/x35 turbos?
Yes, we also sell Dual Ceramic Ball Bearing GTX3582R turbo and the ball bearing system offers a number of benefits over the traditional journal bearing system.
-Firstly, it absorbs much less power. As all bearing systems are “parasitic”, they use some of the power generated by the turbine wheel to “drive” the bearing system. This then leads to the major benefit. The “time to boost” aka turbo lag is dramatically reduced, to give exceptional response to driver demands when needed.
-The second major benefit is the durability of the turbocharger, the ceramic ball bearing is originally used in the aircraft industry, the ball bearing cartridge gives better damping and control over shaft motion, allowing enhanced reliability for both everyday and extreme driving conditions. In addition, the opposed angular contact ball bearing eliminates the need for the thrust bearing commonly a weak link in the turbo bearing system.
SHIPPING |
Handling Time: Item Location: Faster Shipping: International shipping: |
RETURNS |
We offer the eBay 30 days Money Back return policy if the item is never installed and kept in the original packaging. Please read the following terms carefully before purchasing. Item(s) Conditions: Return Postage: Return Address: Refund: |
WARRANTY |
All Industrial Turbos(iTurbos) brand complete turbos, CHRAs, supercores have a 1 year warranty, the warranty covers any damages done during shipping. Special circumstances(IF Any) will be stated clearly on the listing page. No step by step instruction is included. |
PAYMENT |
We accept PayPal only. Credit card or e-Check via PayPal will be accepted. |
CONTACT US |
If you have any questions or concerns, please feel free to contact us by sending eBay message, we will reply your message ASAP. Please kindly notice that messages during the weekend will be delayed, please have some patience. |