Cyclistick

Our bike chain & cable protector set offers some base level protection against chain bite and cable rubbing. This is our entry level protection product, shielding your frame from the most common forms of damage. Made from the highest quality automotive grade protection film that boasts a 5-7 year life span. 

Includes:
2x Chain Stay Protectors: 
220mm x 28mm (narrows to 18mm)

Cable Protectors:
4x 54mm x 22mm 
8x 36mm x 14mm
4x 20mm x 14mm

APPLICATION

  1. Ensure frame is at room temperature (avoid installation below 12°C/53 F)
  2. Clean surface using alcohol based cleaner
  3. Place protector onto frame/crank
  4. Contour using light pressure (heat if required)
  5. Heat vinyl to activate adhesive*
  6. Allow to cure for 1 hour

*Use a heat gun or hairdryer, avoiding direct contact or prolonged exposure.

All our protection products are made form automotive grade film which requires the surface to be free from all contamination. Any interference may cause adhesion issues. 

Sustainability ♻️

All our packaging is made from recycled material and is 100% recyclable

Film backing paper can be recycled via soft plastic schemes available in most supermarkets

Info cards are printed on FSC Certified card & are 100% recyclable