Here we have a listing for various cork strips, simply choose your width, thickness and length from the drop down boxes.

If you require the strips sticky backed with High Tack self adhesive backing, select the SAB option.

Normally we will send these in 5 and 10 metre lengths e.g. 15 metres woould be supplied as a 10 plus a 5 metre length. Other sizes are available. Send us a message if you require different sizes/thicknesses or quantities, i.e. 1.5mm is available up to 44 metres and 3mm up to 22 metres.

As this grade contains a rubber binder it is more heat resistant than just natural cork meaning that the sheets don't have to be too thick for insulation.

Cork displays good acoustic and oil resistant properties so is suitable for a wide range of modelling and craft projects, such as underlay for model railways or as a gap filler. It can be stuck down/glued easily using a contact adhesive or Superglue.

It is easy to cut to size using a pair of scissors or a sharp modelling knife.

Due to the size and weight of these strips we may send them using a variety of courier services including, but not limited to UPS, APC, Hermes etc.

Although we show no postage to Highland, Islands and Eire, we can deliver but there may be an additional cost depending on the service we have to use. Please contact us before committing to buy.

Typical Physical Characteristics (Original)

• Hardness (Shore A): 50 to 70
• Density: Min 480 Kg/m3
• Compressibility (400 psi): 35 % to 50 %
• Recovery (400 psi): Min 80 %
• Tensile Strength: Min 0.93 M Pa
• Flexibility factor (Initial): F=(5)

Immersions

• Volume Change, ASTM Oil #1 (70 h at 100ºC (212ºF)): -5 % to 10 %
• Volume Change, IRM 903 (70 h at 100 ºC (212 ºF)): 10 % to 40 %
• Volume Change, Fuel A (22 h at 23 ºC): 0 % to 15 %