This Articulating wall mount designed specifically for corner installation. Mount arms can independently articulate to allow centered or off-centered corner installation. By separating the wall plates, they can be Installed on separate adjacent walls. If the wall plates are attached to the same wall, the mount can be Installed just like any other articulating TV wall mount

Features:

• Brand: Sunydeal (Guaranty for high quality, unlike other unbranded)

• This Full Motion swivel&Tilt TV mount  specifically designed for corner mount. 
• It can be install to wall corner or horizontal surface.
• This articulating corner mount is perfect to save more space for your home theater or board room
• With the corner dual mount design you can be at ease knowing your valuable tv has a reliable support.
• Also, with the full-motion design you will ensure that you are getting the best viewing angle possible.

• Multi-directional adjustment  tilt, swivel and extend for perfect viewing angle

• Swivel 180 degrees for comfortable view angle in different positions, Swivel left and right for comfortable view angle

• This bracket is made from solid reinforced heavy-gauge cold steel, tested to ensure security, safety

• Common screws included to install TV onto mount. These included screws will fit 95% of TV on the market. If your TV requires special screws, they will need to be purchased separtly from a hardware store.

Specification:

1) Corner Installation:Fits most TV Screen 30"~53" 

     Flat Walls Installation:Fits most TV Screen 30"~70"
2) Tilt: +/- 15 degree up and down and any angle in between
3) Swivel: 180 degree horizontal rotation with secure Dual Arm
4) Dual Wall Plate Designed Especially for Corners. Can also be used for Flat Walls
5) Load Capacity: 45kg/99lbs
6) Iron thickness: 2.0mm
7) Iron pipe thickness: 1.2mm
8) Wall Plate Size: Each plate is 304mm wide by 178mm high. 
9) Fits VESA Mounting Hole Patterns: From 100mm x 100mm(4"x4") to 600mm x 400mm (24"x16") 

    VESA Hole Pattern:100x100,200x200,300x300mm,400x200,400x400,500x400,600x400mm
10) Distance from the TV to the wall: 100mm-450mm
11) By Separating the Wall Plates, they can be installed on separate adjacent walls. If the wall plates are attached to the same wall, the mount can be installed just like other articulating TV wall mount. 

Package:

• One TV Wall Mount
• Standard hardware kit (The Screw kit is standrd,don't make sure fit all the TV models,please buy one kit if don't fit)
• User Manual

Although we do provide a varying selection of screw sizes to attach your TV to the bracket, in some cases you may need to buy different screws as each manufacturer uses a different size of screw.

Please check whether the bracket is suitable for your TV or monitor.   • Look at the back of your TV, find the 4 mounting holes and measure  width and height (VESA), if the width is within 24" and height is within 16"(Max VESA 600mmx400mm), then the TV Mount will work perfect for you.　   •The TV weight should be below 99lbs / 45kg, and this item is guaranteed works for you.    •The wall installed TV bracket must be firmness and tightness, such as concrete wall, solid wood wall, do not install in hollow and floppy  walls.

WARNING:

1.The wall installed TV bracket must be firmness and tightness,such as concrete wall,solid brick wall and solid wood wall.Do not install on hollow and floppy walls.

2.Tighten screw so that wall plate is firmly attached,but do not overtighten.Overtightening can damage the screws,greately reducing their holding power.

3.Do not remove screw or loosen screw until it is no longer engaged with the mount.Doing so may cause the screen to fall.

4.For security option,tighten all the screws with securlty allen wrench and please be make sure using the expansion bolt when you install the tv bracket to the wall

5.PLAT PANEL TV MOUNTS should be installed by specialist.