3S 4/5/20/25/30A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board

3S 20A
Description: Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB BoardSuitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)
Product size:
59*20*3.4mmProduct weight: 4.4g
Charging voltage: 12.6V
Maximum output current: 20A
Maximum output power / charging power: 252W
Precautions:
1.Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip.
2.After connection,it need to first charge activation, then will have the output.
Note: Do not mix the good battery and poor battery to use.The internal resistance of 3 battery capacity are closer will be better.Please buyers know the professional knowledge of this module before buying
Package Included:
1PC*3 string 12.6V 20A 18650 lithium battery protection board
3S 30A
Description:
Brand new and high quality
Module:3S Li-ion Lithium Battery Protection Board
Overcharge detection voltage :4.25±0.025V
Overcharge Lift the voltage:4.15±0.05V
Over discharge detection voltage :2.50±0.08V
Over discharge Lift the voltage:3.00±0.1V
Overcurrent current:20-30A
Working current:15A(Natural cooling 10.A, add heat sink 15A, the maximum instantaneous current 30A)
Remove protection condition automatic recovery, without activation
Protections:
Short circuit protection
Overcharge protection
Over-discharge protection
Overcurrent protection
Operating temperature: -40-85℃
Size: Approx. 50x22x4mm
Package Included:
1PC*3S Li-ion Lithium Battery 18650 Charger Protection Board
3S 4A

Description:
1.For Lithium battery operating voltage: 10.8V ~12.6V
2.Applicable for
10.8V (3.6V * 3S) lithium battery & packs
11.1V (3.7V * 3S) lithium battery & packs
12.6V (4.2V * 3S) lithium battery & packs
3.Cylindrical Lithium battery (Li-ion)
4.Prismatic Lithium Polymer battery (Li-Po)
5.Could also work for 3S2P (6 cells) , 3S3P (9 cells), 3S4P (12 cells) etc.
6.Protections: Short circuit protection,overcharge protection ,over-discharge protection and over current protection
Parameters:
1.Maximum protection voltage ( for every single cell ): 4.255V ± 0.05V
2.Minimum protection voltage ( for every single cell ): 2.35V ± 0.05V
3.Maximum operating current: 4A
4.Size: 35mm * 32mm
Package Included:
1PC*3S Li-ion Lithium Battery Protection Circuit Board

3S 4A-5A
Description:
Properties of the lithium battery protection board
Model: HH - P3-10.8
Charging voltage range: 4.25-4.35 v±0.05v
Size: 48 * 15 * 1.0 mm
Discharge voltage range: 2.5-3.0V±0.05v
Maximum working current: 3A
Working temperature: - 40 --- +50 ℃
Maximum instantaneous current: 4-6A
Storage conditions: - 40 --- +80 ℃
Static electricity: less than 6 uA
Useful life time: more than 50000 hours
Resistance: less than 45 m Ω
Short circuit protection: can protect,need charging
Function
Connect the lithium battery with protection board according to the wiring diagram, when the battery voltage is between the charging pressure and discharge voltage, and the P +, P - charging after 1 seconds,the output voltage P + and P - is the same as the battery voltage. 
Package Included:
1PC*4A-5A PCB BMS Protection Board
3S 25A
Description:
Brand new
Size: about 56mm*45mm*1.2mm
Over voltage range: 4.25-4.35v±0.05v
Over discharge voltage range: 2.3-3.0v±0.05v
Maximum operating current: 0-25A
Maximum transient current: 34-40A
Quiescent current: less than 30uA
Internal resistance: less than 100mΩ
Working temperature: -40---+50℃
Storage condition: -40-- +80℃
Effective life: more than30000h
Short circuit protection: Yes, delayed self recovery
Precaution:
Strictly according to the diagram wiring: 0V(B-)3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit.
After the line is connected, Need to charge first, then have output.
When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use.
Do not mix the good battery and the battery.
The capacity of the battery internal resistance is closer will be better.
Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Please buyers know the professional knowledge of this module before buying
Note:
Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
Please allow 1-5mm differs due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
Package Included:
1PC*PCB Protection Board

Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.

International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.

Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.

 

  For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the " Ask the seller a question" link on eBay.
  We expect positive feedback and 5 scores DSR  from you. 

  1. We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
  2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
  3.  Please include your eBay ID and item number with any email requests.

 

DataCaciques