SGP3000 series DDS signal generator is a cost-effective, versatile signal generator product, instrument uses large scale FPGA integrated circuits and high-speed MCU microprocessor, the internal circuit active crystal as benchmark , high signal stability. Surface mount technology, greatly improving the instrument noise immunity and service life. Display interface using LCD1602 LCD display is divided into two lines, the top line shows the current frequency, the following line display other parameters or features variable. The instrument signal generator, waveform scanning, measuring and using parameters have great advantages, is an electronics engineer, electronics laboratories, production lines and teaching, research ideal test, measurement equipment.SGP3000 instrument model of the last two digits 00 indicate limits (MHz) frequency sine wave on the instrument model. Example: SGP3002,02 means the model sine wave output frequency up to 2MHz.
This instrument has the following salient features:
1. The waveform of species diversity
Can output sine wave, square wave (variable duty cycle), triangle wave, pulse wave (pulse width can be precisely set), ascending sawtooth wave, descending sawtooth wave, four pulse square columns, square columns Bamai common waveform signals and the like.
2. Pulse function
The pulse width can be precisely set between 10nS-1S, pulse width and frequency can be adjusted independently; at any frequency, pulse width and can maintain a fixed value set by the user.
3. Burst function
Burst function can be precisely controlled instrument outputs 1-65536 Pulse train;
4. Measurement Versatility
Shortcut keys, having a key to enter the function interface, the instrument can measure not only the frequency, but also has a 10-bit decimal counter.
5. The bias level adjustment precision
This instrument bias level can -10V to + precise continuously adjustable between 10V,this function in experimental field sensor signal simulator, teaching experiments are necessary conditions. (For example: input to the comparator circuit with an amplitude of 1V, 2.5V, bias small signal)
6. Sweep function
The machine can achieve linear Frequency sweep and logarithmic Frequency sweep two scanning mode, the maximum time of up to 999 seconds sweep, sweep start frequency and stop frequency can be set.
7. Easy installation
Panel embedding mounting structure, user-friendly products, equipment integration.
8. wide voltage supply range
Native support DC14V-DC35V wide voltage supply range.
The instrument has the following excellent technical parameters and functional features:
◆ High frequency accuracy: up to 10-6 frequency accuracy level;
◆ high frequency resolution: the full range of frequency resolution 10mHz;
◆ the duty cycle can be adjusted independently (1% to 99%);
◆ no range limitation: a full range of frequency, regardless of file, direct digital setting;
◆ Height accuracy wave: the output waveform by the function calculated value synthesis, high waveform accuracy, Less distortion;
◆ scanning features: a scanning linear and logarithmic frequency scanning, scan start and end points can be set;
◆ Storage characteristics: can store 30 groups instrument state parameters set by the user, can you at any time use;
◆ Operation: All key operation, LCD1602 LCD display English;
◆ High Reliability: LSI, surface mount technology, high reliability, long life;
◆ Frequency Measurement: have 60MHz frequency counter function, internal / external signal frequency measurement.
If you need other models, please click on the corresponding model.
Model |
SGP3002 |
SGP3005 |
SGP3010 |
SGP3015 |
SGP3020 |
Sine wave frequency range |
0Hz - 2MHz |
0Hz - 5MHz |
0Hz - 10MHz |
0Hz - 15MHz |
0Hz - 20MHz |
Square wave frequency range |
0Hz - 2MHz |
0Hz - 5MHz |
0Hz - 5MHz |
0Hz - 5MHz |
0Hz - 5MHz |
Triangular wave frequency range |
0Hz - 2MHz |
0Hz - 5MHz |
0Hz - 5MHz |
0Hz - 5MHz |
0Hz - 5MHz |
Other waveform frequency range |
0Hz - 2MHz |
0Hz - 5MHz |
0Hz - 5MHz |
0Hz - 5MHz |
0Hz - 5MHz |
Signal output parameters |
Output channel |
|
Output waveform |
Sine wave, square wave (variable duty cycle), triangle wave, pulse wave, Sawtooth wave, four pulse square columns, eight pulse square columns |
Output amplitude |
≥20Vp-p(No load) |
Output Impedance |
50Ω±10% |
DC bias |
±10V |
Frequency resolution |
0.01Hz(10mHz) |
Frequency accuracy |
±5×10-6 |
Frequency stability |
±2×10-6/3 小时 |
Sine wave distortion |
≤0.8% (Reference frequency 1kHz) |
Triangle wave linearity |
≥98% (0.01Hz~10kHz) |
Rise and fall time of square wave |
≤50ns |
Square wave duty cycle range |
1%~99% |
TTL output |
Extent |
>3Vp-p |
Fan-out factor |
>20 TTL(Load) |
TTL level rise and fall times |
≤20ns |
Frequency counter functions |
Counting range |
0-4294967295 |
Measurement frequency range |
1Hz~60MHz |
Input amplitude |
1Vp-p~20Vp-p |
Scan function |
Scan mode |
Linear sweep, log sweep |
Frequency Setting Range |
Arbitrarily set start and end points |
Frequency sweep range |
M1 ~ M2 preset frequency |
Scan rate |
1s~999s/Stepper |
Other features |
Display method |
LCD1602English liquid crystal display |
Storage and use of function |
M0-M19(M0:Default transferred) |
Size |
120mm (long)×70mm(width) ×30mm(high) |
weight |
|
Beeper prompt function |
Can be set to turn on or off via program |
Manufacturing process |
Surface mount technology, large scale integrated circuits, high reliability, long life |
Operational characteristics |
All key operation |
Environmental conditions |
temperature:0~40℃ humidity:﹤80% |
Wide voltage supply range |
DC14V-DC35V |