This controller enclosure measures 16" x16" x 8" (400 x 400 x 200 mm). Four 1/16 DIN sized controllers or timers can be installed with adequate room for wiring and switching device. This box is made of powder coated, 0.060" (1.5 mm) thick steel in black color (base paint*). Strong and durable industrial flat textured black finish makes the final finish paint easier. If your panel will be black, we recommend that you start with the black enclosure. If you start with beige color and paint it black later, it will not look as nice because the top paint may not be as strong as the powder coated base. When the top paint wears out, it will look bad.

The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. Gasket and plugs are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers (included). 

 

An externally mounted heat sink option for 80 Amp is included. The heat sink comes with pre-drilled and tapped mounting holes for SSR mounting. Up to 3 SSRs can be mounted. This externally mounted heat sink eliminates the venting requirement of the enclosure for internally mounted heat sink. The dimension for the heat sink is 135mm x 250mm x 30mm (5.3" x 9.9" x 1.2"). 

For international buyers who are interested in this box, please contact us for more shipping options.

For customerS who don't need heat sink, please see ebay listing ID: 202841584158 

Part list:

Enclosure: 1 pc

80A heat sink: 1 pc

Screws for heat sink cover: 6 pcs

Soft caps: 6 pcs

Grounding sticker: 1 pc

Hanger: 4 pcs

Hanger screw and nut: 4 sets

*: The black base paint may have some light imperfections due to the transportation.

Note: Due to the size and heavy weight of this enclosure, we only provide flat rate ground shipping to lower 48 states in US. For customers in Alaska/Hawaii, US Protectorates or APO/FPO, please contact seller for shipping quote.