Product Introduction
Congratulations on purchasing of our Fixed Wireless Terminal.
Before using this terminal, please kindly read this user guide carefully.
This is our new design, which uses 4G networks to operate.
You can dial the local calls, domestic and international calls with this Terminal 
connecting with a common wired desktop phone and a standard SIM card.
It is widely used in these areas:
Remote country, mountains,
Dwelling house with weak signals,
Public telephone shops, offices, telemarketing,
Removable places such as ships, trains, and long distance buses.
Our wireless terminal also has these characteristics as below:
Easy to install, easy to operation, powerful capacity of signals receiving,
Clear talking setting, long using life, steady performance.

Key Technical Specifications
Following are the key technical specifications of this terminal:

Features:
1. No need to invest in ground wire line, use 4G TD-LTE/3G WCDMA /2G GSM mobile phone SIM card, easy to install
2. Support international and domestic, local, fixed / mobile voice services
3. does not change the original dial-up habits, and ordinary telephone landline operating habits of the same
4. With a reverse polarity signal, you can access the meter or use the computer meter
5. Built-in watchdog duty circuit, automatic detection of equipment operating status, automatic restart failure
6.Caller ID only support DTMF format of telephone, not support other types
7. Standard communication voltage, can be connected with the user switch (PABX)
8. Automatic IP function, multiple IP settings
9. Fixed long-distance automatic insertion of the calling IP prefix, such as 17951,17911,193 and so on
10. International, domestic, local calls and other types of access settings
11. Default local area code, local number and prohibited numbers or numbers
12. Encryption settings, such as PIN code, PUK code encryption card lock function
13. LCD display show the signal, standby, working status and other information
14. Support power off work (include built-in battery)，the back up battery to allow operation in the event of mains power failure.

15. can not support Fax Modem (Fax /Data) or not support internet access

1.Our Dialler Networks support: 

4G LTE FDD: B1/ B2①/ B3/ B4/ B5/ B7/ B8/ B28 (①: Rx-diversity not supported.)
4G LTE TDD: B40
3G WCDMA: B1/B2/B5/B8
2G GSM: B2/B3/B5/B8

GSM Compatibility 4G 3G GSM
Frequency range:
AU Frequencies Supported MHz 
4G 
Telstra B1 2100, B3 1800, B7 2600, B8 900, B28 700
Optus B1 2100, B3 1800, B7 2600, B28 700, B40 2300
Vodafone B1 2100, B3 1800, B5 850
3G
Telstra B5 850
Optus B8 900, B1 2100
Vodafone B1 2100

Australian 3G bands:
 B5 850MHz (Telstra, Vodafone) – Exclusive 3G band
 B8 900MHz (Optus, Vodafone) – available in most metro areas
 B1 2100MHz (Telstra, Optus, Vodafone) – Exclusive 3G band
Australian 4G bands:
 Australia is currently using these LTE bands (LTE bandmask in brackets):
 2100Mhz (B1) FDD (0000000000000001) – Telstra (3G spectrum)
 1800Mhz (B3) FDD (0000000000000004) – Telstra, Optus, Vodafone
 900Mhz (B8) FDD (0000000000000080) – Telstra, Vodafone, Optus (utilises spectrum previously used by 2G)
 2300Mhz (B40) TDD (0000008000000000) – Optus (Vivid wireless spectrum)

3. Voltage: DC 5V /DC12V 
4. Stand by hours: 48 Hours 
5. Talk time: 2-6 Hours 
6. Charging time: 6 hours 
7. Power consumption: Static≤25MA ;Emission≤500MA 
8. Peak power consumption: 0.25W/0.5W 
9. Receive sensitivity: -104db 
10. Antenna increment: All directions: 5.0db ; Certain/Selection: 12db 
Key functions
The key functions of the terminal are list as below:
1 .Multi-function LCD lights display signal, running state.
2.Can dial the local calls, mobile calls, international calls and special free calls.
3.Built-in watchdog duty circuit, machine any fault will restart.
4.Provide standard communication voltage, support DTMF system
5.Caller ID display time and date, the power supply of battery can 
display at the same time on the LCD.
6.Automatic card-locking and net-locking enable
7.If 4G is not available ,it will drop down to 3G

Connect the terminal

Installing the Antenna
To choose a proper place for the antenna is the first and very important step 
for antenna installing. You can use your mobile phone to search for the place 
where the strongest signal is. Then put the antenna here.
Please do not make the antenna too close to the terminal. It will disturb the signal 
of the Please do not make the antenna and the terminal too close to the TV set,
computer, and radiogram. It will disturb the signal of the terminal.

Inserting a SIM Card
Make sure the terminal is switched off and the AC adapter is unplugged: insert the 
SIM card only when the terminal is switched off and the AC adapter is unplugged. 
According to the chart instructions

Connecting your terminal with desktop phone
If you want to use the terminal to make calls, you should connect the terminal with a 
Common wired desktop phone.
There is one or two communication ports at the back of the terminal .You can connect one desktop phone and billing machine (optional) with our terminal.
It's very easy to connect the phone and terminal, just need a common communication cable .
Call
Make or receive a call is Similar to your fixed line 
When your phone is ringing just lift up the handset of the telephone set and speak.
Dial your number, after a timeout (end of dialing timeout default value:6sec)the 
call Will be launched. To speed up you can press# at the end of the number.

Package list:
1 x Fixed Wireless Terminal Main Unit (with Built-in battery)
1 x AU Plug Power Supply 12V
1 x Special Antenna
1 x Telephone line
1 x User manual (English)

Note:

1. the dialler main funtion be to work with Landline, if you need works with other alarm sytstem, need ask alarm system supplier if can compatible with other dialler device, some alarm system can work，many alarm system will not work,
not work for alarm system Bosch 16 plus etc.