7 AMP Street Kit - Holden 253 to 308 with VN Style Heads, FLAT TAPPET CAM, carburettor, N.A.
This ICE Ignition kit is for the Holden 253-308 with VN Style Heads fitted with
-
A FLAT TAPPET Camshaft,
-
Carburettor(s) - including electronic carburettor(s).
-
No forced induction or nitrous.
This ICE Ignition kit is ideal for most street driven cars and can also be used with electronic carburettors that control "Air & Fuel" only. The "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system on the market. More spark means greater tuneability which leads to improved performance.
The ICE Ignition 7 AMP Street Series Control Box
The ICE Ignition 7060MV Street Series Control Box features the following.
-
16 Pre-programmed ignition curves - 16 push-button selectable ignition curves enable total timing adjustment in real-time. It features 8 FAST Timing Advance Curves and 8 SLOW Timing Advance Curves
-
It eliminates the need for distributor re-graphing when engine upgrades are introduced.
-
It also enables total timing adjustment in real-time for changes in fuel quality.
-
-
Vacuum Advance Manifold Absolute Pressure (MAP) Sensor - Advances timing up to 10 degrees under cruise conditions allowing the engine to run smoothly and improves fuel efficiency. MAP sensor use is optional, it won't impact ignition performance if not used.
The controller must be mounted inside your car, NOT inside your engine bay. ICE Ignition recommends the use of NON-RESISTOR Spark Plugs.
Why choose the ICE Ignition 7060MV Kit?
-
The "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system on the market.
-
It's ideal for most street-driven cars and provides great tuneability.
-
Push-Button selectable timing makes distributor re-graphs obsolete.
-
It can also be used with electronic carburettors that control "Air & Fuel" only.
-
More spark means greater tuneability which leads to improved performance.
-
Three Year Australian Warranty, made in Melbourne
Our Value-Add Service
Need help with establishing a base tune for your engine? We can help with engine timing (i.e. base timing and curve selection), spark plug selection and spark plug gap for all customers that purchase an ICE Ignition kit through Gear Campus. Please contact us via eBay Message upon ordering your ICE Ignition kit.
What's in the ICE Ignition Kit?
This ignition kit includes the following
-
7060MV Controller - 16 pre-defined push-button selectable timing curves & Manifold Absolute Pressure (MAP) sensor.
-
ICE Ignition SMALL CAP (4" Diameter) Billet Distributor - It's made from 6061 aircraft-grade aluminium and uses a “Hall Effect Sensor” to communicate with the Control Box.
-
If you prefer a LARGE CAP Distributor (5" Diam.) include the following in the Customer Comments section during checkout. "Please supply this kit with a LARGE CAP Distributor". This is a NO COST option.
-
A CAST IRON Gear is fitted to the distributor to suit a FLAT TAPPET Camshaft.
-
-
ICE Ignition 9HOL807 Pro 100 9 mm leads (Black) - This a "Plug & Play" lead set with STRAIGHT Spark Plug Boots. Lead fitment is AROUND THE VALVE COVERS. If a different lead set is required please contact us via eBay Message.
-
ICE Ignition 4200 Pro Series Race Coil - It has twice the energy of a standard coil and is the ideal coil for naturally aspirated engines.
-
Wiring Loom - It's approx. 2 metres long and is easy to install.
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">Product Features & Benefits
</div>
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">
ICE Ignition 7 AMP Kit; Holden 253-308 with VN Heads
Engine Type:
All Holden 253 - 308 V8's with VN Heads
Fuel Delivery:
Carburettor(s) - including Electronic Carburettor(s)
Engine Setup:
Naturally Aspirated
Controller:
7 AMP Street Series
Controller Features:
16 curves, MAP Sensor
Wiring Loom:
Included, approx 2 meters long
Distributor Diameter:
Approx 4"
Distributor Triggering:
Hall Effect Sensor
Distributor Shaft:
4130 Chromoly
Distributor Gear:
SG Iron gear for flat tappet cam
Distributor Cap Type:
HEI / MALE Post
Dist. Plug Wire Retainer:
Included
Spark Plug Boot Type:
Straight
Ignition Lead Diameter:
9 mm
Coil Type:
ICE Ignition 4200 Coil
Lead / Plug Wire fitment:
Around valve covers
Lead Markers & install tool:
Included
We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.
The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.
Gear Campus is the "Go-To-Place" for highly innovative Automotive, Boating, Fishing and Cycling products. We search the globe for ground-breaking products that align well with our vision. We also pride ourselves on providing the very best customer service and look to engage our customers at every opportunity.
If you can't find the product in our store please contact us via eBay Message.
Gear Campus is the authorised reseller for ICE Ignition, Australia’s leading manufacturer of performance automotive and boating ignition systems. The ICE Ignition product range includes
- Performance Ignition Systems for cars and boats using Digital Inductive Spark technology
- Ignition Leads for cars and boats with inboard & outboard engines
- Ignition Coils
- Voltage Boosters
We are also the Australian Authorised Distributor for SeaSucker vacuum mounted products. The SeaSucker product range includes
- Bike Racks
- Roof Racks,
- Tablet Mounts
- Rod Holders
- Bait Boards
- GPS & Fish Finder Mounts
- Cup Holders
- Storage Products
- Dive Tank Holders
- & More
All SeaSucker products use their patented industrial vacuum mount with up to 90 kg of holding power from a single vacuum mount.
We are the authorised reseller for RAM Mounts, Lee’s Tackle and Reel Colors fishing solutions.
If it uses gears or cogs chances are you will find a revolutionary product at Gear Campus to suit your needs.
We accept payment by any of the following methods:
- PayPal
- Funds Transfer (account details provided during checkout)
We ship our goods to Australia, New Zealand, Europe and the US.
- Australia - We use Star Track Express to ship goods anywhere in Australia. We do accept Post Office Boxes as a valid shipping address although if selected we will send your goods using Australia Post with "Signature on Delivery"
- New Zealand, Europe and the US - We use Australia Post International Express Post service with "Signature on Delivery".
Please also note that the shipping rates for many items we sell are weight-based. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.
If you need to return an item, please contact us via eBay Message with your order number and details about the product you would like to return.
At Gear Campus, we stand behind our products as our goal is to have as many customers as true fans of our products and services.
That’s why we offer our customers a "30 Day Money Back Guarantee" on the cost of the product only. If for any reason you are not completely satisfied with the product you can return it to us within 30 Days and receive a refund on the item cost only. This should give you peace of mind when shopping with us.
Please ensure all packaging is kept as we do require the goods to be returned in the same brand new condition as you received them. This includes all accessories and product manuals. Please ensure the product you are returning has not been damaged in any way during the time it was in your possession. Failure to return the product in its original packaging including accessories and manuals and/or product returns that are damaged, have visible marks or are soiled will incur a Restocking Fee. The Restocking Fee is a variable fee and is dependent upon the level of damage or missing items.
Please Note: Our "30 Day Money Back Guarantee" does not include the cost of postage in your initial order.
You should expect to receive your refund within a few weeks of giving your package to the return shipper; however, in many cases, you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 2 business days), and the time it takes your bank to process our refund request (5 to 10 business days). All refunds will be returned via the nominated payment method used upon the initial purchase. We will confirm via email when we have initiated the refund.
We will ask why you are returning the product however this is to help us better understand our customers and how we could improve our products and services. Furthermore, we will respond quickly with instructions on how to return items from your order.
The cost of returning the product is your cost. The goods will remain your responsibility during transit until such time that they arrive at the designated address provided by our staff. We accept no liability for any loss or damage that may occur during transit.
7 AMP Street Kit - Holden 253 to 308 with VN Style Heads, FLAT TAPPET CAM, carburettor, N.A.
This ICE Ignition kit is for the Holden 253-308 with VN Style Heads fitted with
-
A FLAT TAPPET Camshaft,
-
Carburettor(s) - including electronic carburettor(s).
-
No forced induction or nitrous.
This ICE Ignition kit is ideal for most street driven cars and can also be used with electronic carburettors that control "Air & Fuel" only. The "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system on the market. More spark means greater tuneability which leads to improved performance.
The ICE Ignition 7 AMP Street Series Control Box
The ICE Ignition 7060MV Street Series Control Box features the following.
-
16 Pre-programmed ignition curves - 16 push-button selectable ignition curves enable total timing adjustment in real-time. It features 8 FAST Timing Advance Curves and 8 SLOW Timing Advance Curves
-
It eliminates the need for distributor re-graphing when engine upgrades are introduced.
-
It also enables total timing adjustment in real-time for changes in fuel quality.
-
-
Vacuum Advance Manifold Absolute Pressure (MAP) Sensor - Advances timing up to 10 degrees under cruise conditions allowing the engine to run smoothly and improves fuel efficiency. MAP sensor use is optional, it won't impact ignition performance if not used.
The controller must be mounted inside your car, NOT inside your engine bay. ICE Ignition recommends the use of NON-RESISTOR Spark Plugs.
Why choose the ICE Ignition 7060MV Kit?
-
The "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system on the market.
-
It's ideal for most street-driven cars and provides great tuneability.
-
Push-Button selectable timing makes distributor re-graphs obsolete.
-
It can also be used with electronic carburettors that control "Air & Fuel" only.
-
More spark means greater tuneability which leads to improved performance.
-
Three Year Australian Warranty, made in Melbourne
Our Value-Add Service
Need help with establishing a base tune for your engine? We can help with engine timing (i.e. base timing and curve selection), spark plug selection and spark plug gap for all customers that purchase an ICE Ignition kit through Gear Campus. Please contact us via eBay Message upon ordering your ICE Ignition kit.
What's in the ICE Ignition Kit?
This ignition kit includes the following
-
7060MV Controller - 16 pre-defined push-button selectable timing curves & Manifold Absolute Pressure (MAP) sensor.
-
ICE Ignition SMALL CAP (4" Diameter) Billet Distributor - It's made from 6061 aircraft-grade aluminium and uses a “Hall Effect Sensor” to communicate with the Control Box.
-
If you prefer a LARGE CAP Distributor (5" Diam.) include the following in the Customer Comments section during checkout. "Please supply this kit with a LARGE CAP Distributor". This is a NO COST option.
-
A CAST IRON Gear is fitted to the distributor to suit a FLAT TAPPET Camshaft.
-
-
ICE Ignition 9HOL807 Pro 100 9 mm leads (Black) - This a "Plug & Play" lead set with STRAIGHT Spark Plug Boots. Lead fitment is AROUND THE VALVE COVERS. If a different lead set is required please contact us via eBay Message.
-
ICE Ignition 4200 Pro Series Race Coil - It has twice the energy of a standard coil and is the ideal coil for naturally aspirated engines.
-
Wiring Loom - It's approx. 2 metres long and is easy to install.
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">Product Features & Benefits
</div>
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">
ICE Ignition 7 AMP Kit; Holden 253-308 with VN Heads
Engine Type:
All Holden 253 - 308 V8's with VN Heads
Fuel Delivery:
Carburettor(s) - including Electronic Carburettor(s)
Engine Setup:
Naturally Aspirated
Controller:
7 AMP Street Series
Controller Features:
16 curves, MAP Sensor
Wiring Loom:
Included, approx 2 meters long
Distributor Diameter:
Approx 4"
Distributor Triggering:
Hall Effect Sensor
Distributor Shaft:
4130 Chromoly
Distributor Gear:
SG Iron gear for flat tappet cam
Distributor Cap Type:
HEI / MALE Post
Dist. Plug Wire Retainer:
Included
Spark Plug Boot Type:
Straight
Ignition Lead Diameter:
9 mm
Coil Type:
ICE Ignition 4200 Coil
Lead / Plug Wire fitment:
Around valve covers
Lead Markers & install tool:
Included
We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.
The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.
Gear Campus is the "Go-To-Place" for highly innovative Automotive, Boating, Fishing and Cycling products. We search the globe for ground-breaking products that align well with our vision. We also pride ourselves on providing the very best customer service and look to engage our customers at every opportunity.
If you can't find the product in our store please contact us via eBay Message.
Gear Campus is the authorised reseller for ICE Ignition, Australia’s leading manufacturer of performance automotive and boating ignition systems. The ICE Ignition product range includes
- Performance Ignition Systems for cars and boats using Digital Inductive Spark technology
- Ignition Leads for cars and boats with inboard & outboard engines
- Ignition Coils
- Voltage Boosters
We are also the Australian Authorised Distributor for SeaSucker vacuum mounted products. The SeaSucker product range includes
- Bike Racks
- Roof Racks,
- Tablet Mounts
- Rod Holders
- Bait Boards
- GPS & Fish Finder Mounts
- Cup Holders
- Storage Products
- Dive Tank Holders
- & More
All SeaSucker products use their patented industrial vacuum mount with up to 90 kg of holding power from a single vacuum mount.
We are the authorised reseller for RAM Mounts, Lee’s Tackle and Reel Colors fishing solutions.
If it uses gears or cogs chances are you will find a revolutionary product at Gear Campus to suit your needs.
We accept payment by any of the following methods:
- PayPal
- Funds Transfer (account details provided during checkout)
We ship our goods to Australia, New Zealand, Europe and the US.
- Australia - We use Star Track Express to ship goods anywhere in Australia. We do accept Post Office Boxes as a valid shipping address although if selected we will send your goods using Australia Post with "Signature on Delivery"
- New Zealand, Europe and the US - We use Australia Post International Express Post service with "Signature on Delivery".
Please also note that the shipping rates for many items we sell are weight-based. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.
If you need to return an item, please contact us via eBay Message with your order number and details about the product you would like to return.
At Gear Campus, we stand behind our products as our goal is to have as many customers as true fans of our products and services.
That’s why we offer our customers a "30 Day Money Back Guarantee" on the cost of the product only. If for any reason you are not completely satisfied with the product you can return it to us within 30 Days and receive a refund on the item cost only. This should give you peace of mind when shopping with us.
Please ensure all packaging is kept as we do require the goods to be returned in the same brand new condition as you received them. This includes all accessories and product manuals. Please ensure the product you are returning has not been damaged in any way during the time it was in your possession. Failure to return the product in its original packaging including accessories and manuals and/or product returns that are damaged, have visible marks or are soiled will incur a Restocking Fee. The Restocking Fee is a variable fee and is dependent upon the level of damage or missing items.
Please Note: Our "30 Day Money Back Guarantee" does not include the cost of postage in your initial order.
You should expect to receive your refund within a few weeks of giving your package to the return shipper; however, in many cases, you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 2 business days), and the time it takes your bank to process our refund request (5 to 10 business days). All refunds will be returned via the nominated payment method used upon the initial purchase. We will confirm via email when we have initiated the refund.
We will ask why you are returning the product however this is to help us better understand our customers and how we could improve our products and services. Furthermore, we will respond quickly with instructions on how to return items from your order.
The cost of returning the product is your cost. The goods will remain your responsibility during transit until such time that they arrive at the designated address provided by our staff. We accept no liability for any loss or damage that may occur during transit.