1.50 Inch Outside Diameter
1.25 Inch Inside Diameter
.125 Inch Wall Thickness
Tolerances: Tubes OD Dia Tol +/-.025", ID Tol +/-.025"
Cut to Length Tolerances +/- 1/4"
They can be machined,
drilled, cut and sawed, and is easily joined with solvents and adhesives. UL
94HB
Polycarbonate Tubes are not Pressure or Vacuum
Rated
These Polycarbonate tubes are extruded,
therefore, they will have extrusion lines, from the extrusion process.
Extrusion lines appear as fine scratching. They are not as clear as glass
or cast acrylic. They also have a blue edge tint.
1/4" Wall Thickness Tubes (note: larger diameters have heavier extrusion
lines, and less clarity.
265° F continuous use temperature. Polycarbonate has a glass transition
temperature of about 147 °C (297 °F; 420 K), so it softens gradually above this
point and flows above about 155 °C (311 °F; 428 K)
Tubes less than full length (6 Ft) are cut on a band saw, and may
have slight burrs, shavings, etc. Larger Diameters may not be perfectly
flat or straight or perpindicular to the length due to blade
taper/wandering.
International / Ebay Global Shipping Customers
Extruded Clear
Polycarbonate Tubes. When ordering the number of feet purchased, is the length
that will be shipped. For any country outside of the United States, the maximum
length that can be shipped is 5 foot lengths. Tubes are sent to Ebay
Forwarding/Customs department in Kentucky, and the max package length can’t
exceed 66", therefore, 5 foot lengths are the longest length for
international customers.
Maximum Length is 5 Feet. 6 Foot Long are not available to ship to international
customers.