The new AquaECO series of pond pump's from AllPoSolutions with its brand new innovative electronics brings massive energy savings, low noise and long durabilty while maintaining high performance.

Compared to other pond pump brands the wattage use of the AquaECO range of pond pumps is extremely economical, saving you money in the long run.

Ultra Low Wattage:
AquaECO-3000 (3000L/H) = 10w
AquaECO-4500 (4500L/H) = 30w
AquaECO-6000 (6000L/H) = 40w
AquaECO-8000 (8000L/H) = 70w
AquaECO-10000 (10000L/H) = 80w
AquaECO-12000 (12000L/H) = 100w
AquaECO-14000 (14000L/H) = 120w
AquaECO-16000 (16000L/H) = 140w

Designed to circulate water to a pond filter or waterfall, the AquaECO cage is specially designed to tolerate particles of dirt/ debris up to 6-8mm and prevent clogging by providing the maximum surface area for drawing water in through the guard to the pump.

For added peace of mind our AquaECO range comes with a full 2 years warranty that covers you against any electrical defect with the item.FeaturesHigh water flow with low energy consumption for energy conscious and environmentally friendly operation.
Included with the AquaECO pump is an additional inlet that allows you to attach hose to the inlet of the pump to provide water directly from a source such as a pond skimmer.

Operational mode 1:

Designed to be placed straight into your pond, the AquaECO will simply draw water directly in through the filter cage, through the pump and out of the directional hosetail outlet.

Operational mode 2:

By attaching the included hosetail inlet to the front of the pump, you can direct an alternative water source (such as pond skimmer) directly into the front of the pump.

The inlet and outlet hosetail adaptors direction can be adjusted by slightly unscrewing the blue hosetail nut, adjusting the angle to your requirements and then re-tightening the hosetail nut.

The filter cage is secured using four strong clips which allow for easy tool free access to your pump and impeller area.
The cage design incorporates a convenient handle meaning the AquaECO pump can be removed from your pond easily, avoiding potential damage by pulling the power cable to retrieve the pump.

Designed to pump dirty water 24/7
High quality impeller and ceramic shaft for problem free transport of dirt particles.
Robust filter housing minimises the risk of blockage and makes installation and maintenance easy.
Unique cage design incorporating convenient handle for easy placement / retrieval
Cage design allows for easy access for quick hassle free maintenance
Inlet / Outlets can be angled to your requirements for a simple installation
Inlet / Outlet hosetail connector: 25/32/38mm
Large Outlet hosetail: 49mm inside / 54mm outside diameter (AquaECO 10000 - 16000 Only)
Power Cable: 10m

Specifications

Model: AquaECO-3000 
Max flow rate - 3000L/H 
Wattage: 10w
Max head - 2m 

Model: AquaECO-4500 
Max flow rate - 4500L/H 
Wattage: 30w
Max head - 4m 

Model: AquaECO-6000 
Max flow rate - 6000L/H 
Wattage: 40w
Max head - 4.2m 

Model: AquaECO-8000 
Max flow rate - 8000L/H 
Wattage: 70w
Max head - 5m  

Model: AquaECO-10000 
Max flow rate - 10000L/H
Wattage: 80w
Max head - 6m 

Model: AquaECO-12000 
Max flow rate - 12000L/H 
Wattage: 100w
Max head - 6.5m 

Model: AquaECO-14000 
Max flow rate - 14000L/H 
Wattage: 120w
Max head - 7m 

Model: AquaECO-16000 
Max flow rate - 16000L/H 
Wattage: 140w
Max head - 7.5m