• Descrizione



Rasomuro is the ideal subframe to combine door and room in one thing. 
This door has been created to be installed easily and quickly on plastered walls or in plasterboard, it can be applied on existing floors or to be built and ideal for refurbishment works. Our Raso Muro door has a very robust aluminum structure (core) and a modern, minimalist design. The door panel is shipped ready to be painted, the hinges are concealed, with magnetic lock.

The INVISIBILE total disappearance magnetic lock is fitted as standard.



 

To make the most of the little space available, to further characterize the furniture or to distribute the light more evenly if the rooms are small: these are just some of the cases in which to insert a Sliding Door .... living area and kitchen area can be a functional and creative choice! 
The doors are functional and beautiful to look at, with our exposed track. The track in many finishes is completely visible and for this reason gives a special elegance to the door. Finishing to furnish and personalize the environments. 
The installation of doors, does not present particular difficulties, to be carried out even with the Do-it-yourself technique.






  • Caratteristiche Tecniche



  • Frame core in passivated extruded aluminum (alloy EN AW 6060- Anticorodal 063) that replaces the box (padded-door jambs) with plastered net in klevar, prevents the onset (even after years) of unsightly cracks between the wall and the frame.





  
Door panel has a drum structure of total thickness mm. 54 made with solid wood perimeter frame and SOUNDPROOFING with high density polyestyrene inside covered with 2 sheets of MDF honed in Class 1 and with low formaldehyde emission.

Stop gasket (pre-installed) in soft rubber, which makes the closure soft and silent.














The lock is invisible magnetic, (also available in versions with latch). 

On request are applicable: keyhole / cylinder hole lock and pawl hole, roller lock, panic lock, and / or electric strike, safety lock with electric or mechanical strike..


  



  • Adjustable 3D hinges in the three axes, in the three directions, tested for n. 200,000 cycles. The adjustment allows you to adjust the door in height, width and depth.











  • here are other solutions for locks and handles
  • The standard lock is the magnetic INVISIBLE supplied (without any surcharge)  

  • with invisible handle and with pawl (surcharge of Pounds 50.00) 
  • with invisible handle applied to the mirror (surcharge of 50.00 Pounds + mirror surcharge of 190.00 Pounds)

  • with handle and key (no surcharge)




  • Mounting types wall version

1. Unpack the door from its packaging. Place the aluminum frame with the stiffening spacers and plumb. 

2. Rest the door with its frame in the seat. Balance the door with a wedge, so as to leave mm. 6 from the ground.

3. Now you start walling up the clamps. You have to pay attention while walls the door try to open and close the door.

4. Apply the supplied mesh in the overlap between the aluminum and masonry frame. After inserting all the plugs.

5. Fill between the frame and the wall with the filler in quality filling paste.

6. Shave the walls, respecting the plaster wire determined by the frameso much to make it unique.

7. Paint with a light hand on one side and then counterbalance on the opposite side.

8. Leave the spacers until the cement is completely dry (12 hours). Proceed with the painting.

9. And here is the finished result.

10.and here .... the game is done !!

11. Does it seem difficult?

12. what a nice job

Go to our online sales site

www.porteitaliane.it