Description:
YJ-14015 NRF51822 Core51822(B): 2.4 GHz NRF51822 Core51822:
Onboard chip: nRF51822
Communication distance (open outdoor@1M data rate): 30m
Frequency range: 2.4GHz
Operating voltage: 2.0V ~ 3.6V
Operating temperature: -40℃ ~ 85℃
Dimension (PCB): 24.5mm x 32.26mm
Expansion pinheader: all the I/Os except P0.26 and P0.27
Pinheader pitch: 2.00mm
Spacing between pinheaders on the left side and the right side: 18.00mm
Antenna: onboard antenna
nRF51822 Features:
2.4 GHz multiprotocol RF transceiver
ARM® Cortex™-M0 32 bit processor
128 bit AES HW encryption
256kB flash & 16kB RAM
Programmable Peripheral Interconnect (PPI)
Digital interfaces: SPI, I2C, UART
10 bit ADC
Programmable output power: -20 to +4 dBm
Independent application development and protocol stack
Fully compatible with NRF24L series
Pinout compatible with NRF51xxx series
Global separate power management
Operating voltage: 1.8 V ~ 3.6 V
Applications:
Wearable devices
Bluetooth intelligent application
Mobile phone accessories
RFID labels
Smart home appliances
Industry control
Data acquisition system
Revision History:
2015.06, Core51822 upgrades the onboard chip to Rev3, features 16kB RAM, supports higher version SDK, and all the demo codes are still compatible with the Rev2 ones.
Package Included:1PC*BLE4.0 Bluetooth 2.4GHz Wireless NRF51822 Core51822 (B)
YJ-14015 NRF51822 Core51822(B): 2.4 GHz NRF51822 Core51822:
Onboard chip: nRF51822
Communication distance (open outdoor@1M data rate): 30m
Frequency range: 2.4GHz
Operating voltage: 2.0V ~ 3.6V
Operating temperature: -40℃ ~ 85℃
Dimension (PCB): 24.5mm x 32.26mm
Expansion pinheader: all the I/Os except P0.26 and P0.27
Pinheader pitch: 2.00mm
Spacing between pinheaders on the left side and the right side: 18.00mm
Antenna: onboard antenna
nRF51822 Features:
2.4 GHz multiprotocol RF transceiver
ARM® Cortex™-M0 32 bit processor
128 bit AES HW encryption
256kB flash & 16kB RAM
Programmable Peripheral Interconnect (PPI)
Digital interfaces: SPI, I2C, UART
10 bit ADC
Programmable output power: -20 to +4 dBm
Independent application development and protocol stack
Fully compatible with NRF24L series
Pinout compatible with NRF51xxx series
Global separate power management
Operating voltage: 1.8 V ~ 3.6 V
Applications:
Wearable devices
Bluetooth intelligent application
Mobile phone accessories
RFID labels
Smart home appliances
Industry control
Data acquisition system
Revision History:
2015.06, Core51822 upgrades the onboard chip to Rev3, features 16kB RAM, supports higher version SDK, and all the demo codes are still compatible with the Rev2 ones.
Package Included:1PC*BLE4.0 Bluetooth 2.4GHz Wireless NRF51822 Core51822 (B)
NRF51822 Networking Module:
16 KB and 128KB on-chip flash RAM;
Digital and mixed-signal surrounding, including SPI, 2 - wire, ADC and quadrature decoder;
16 PPI channels;
Load match on a chip "when the power supply range of 1.8-3.6 V, 1.75 1.95 V" bypass mode;
Slice up and pull DC/DC converter for 3 v battery (for example, a button battery);
On +/- 250 parts per million (PPM) 32 KHZ RC oscillator, the bluetooth application of low power consumption,
does not need external 32 KHZ crystals, can save cost and PCB space;
6x6mm 48pin QFN packages, providing up to 32 GPIO;
A complete bluetooth protocol stack (the link layer to the configuration file).
NRF51822 S110 is downloadable, royalty-free, precompiled binary bluetooth stack,
low power consumption can be independent programming and update.
Features:
Asynchronous API and event-driven SVC;
The runtime protection;
GATT, GAP and L2CAP level API;
Peripheral and broadcasting role;
GATT client and the server;
And more than 2.4 GHz RF proprietary protocols of parallel protocol operations;
Less than 128 KB of code and 6 KB of RAM,
with more than 128 KB of flash memory for the application and 10 KB of RAM;
And use a generation compared to nRF8001 dual chip application,
running S110 stack nRF51822 cut as much as 50% of power consumption.
S110 stack and nRF51822 nRF518 SDK to cooperate with each other and
nRF518 contains comprehensive bluetooth low energy profile, services, and sample collection.
NRF51822 for proprietary application provides a new modified Gazell 2.4 GHz RF protocol stack,
and series nRF24L Gazell application to interoperability.
Compared with the last generation nRF24LE1,
nRF51822 combined with new Gazell protocol stack can cut as much as 30% of power consumption.
Nordic Semiconductor nRF51822 is a multi-protocol bluetooth low energy / 2.4 GHz dedicated RF single chip solutions,
widely used in PC peripheral, Internet TV, toys, remote controls, sports/fitness/health sensors and automation applications.
Package Includeed:1PC*NRF51822 Wireless Bluetooth / Networking Module
16 KB and 128KB on-chip flash RAM;
Digital and mixed-signal surrounding, including SPI, 2 - wire, ADC and quadrature decoder;
16 PPI channels;
Load match on a chip "when the power supply range of 1.8-3.6 V, 1.75 1.95 V" bypass mode;
Slice up and pull DC/DC converter for 3 v battery (for example, a button battery);
On +/- 250 parts per million (PPM) 32 KHZ RC oscillator, the bluetooth application of low power consumption,
does not need external 32 KHZ crystals, can save cost and PCB space;
6x6mm 48pin QFN packages, providing up to 32 GPIO;
A complete bluetooth protocol stack (the link layer to the configuration file).
NRF51822 S110 is downloadable, royalty-free, precompiled binary bluetooth stack,
low power consumption can be independent programming and update.
Features:
Asynchronous API and event-driven SVC;
The runtime protection;
GATT, GAP and L2CAP level API;
Peripheral and broadcasting role;
GATT client and the server;
And more than 2.4 GHz RF proprietary protocols of parallel protocol operations;
Less than 128 KB of code and 6 KB of RAM,
with more than 128 KB of flash memory for the application and 10 KB of RAM;
And use a generation compared to nRF8001 dual chip application,
running S110 stack nRF51822 cut as much as 50% of power consumption.
S110 stack and nRF51822 nRF518 SDK to cooperate with each other and
nRF518 contains comprehensive bluetooth low energy profile, services, and sample collection.
NRF51822 for proprietary application provides a new modified Gazell 2.4 GHz RF protocol stack,
and series nRF24L Gazell application to interoperability.
Compared with the last generation nRF24LE1,
nRF51822 combined with new Gazell protocol stack can cut as much as 30% of power consumption.
Nordic Semiconductor nRF51822 is a multi-protocol bluetooth low energy / 2.4 GHz dedicated RF single chip solutions,
widely used in PC peripheral, Internet TV, toys, remote controls, sports/fitness/health sensors and automation applications.
Package Includeed:1PC*NRF51822 Wireless Bluetooth / Networking Module
NRF51822 3.3V
1. Low-power single-mode BLE4.0 Bluetooth chip;
2. Integrated standard BLE4.0 agreement Zhan;
3. Standard UART (TTL) interface for direct connection to external MCU serial port or serial peripherals;
4. Optional hardware serial port baud rate 9600 or 38400, default is 9600;
5. Interrupt output prompts;
6. Hardware enable control;
7. Operating distance: 0-30m, class II level;
8. Supply voltage: 3.3V;
9. Module comes with PCB antenna, optional external antenna;
10. Module size: 18.5*9.1*2.0mm
Package Included: 1PC*NRF51822-04 BLE4.0 Wireless Bluetooth Module
1. Low-power single-mode BLE4.0 Bluetooth chip;
2. Integrated standard BLE4.0 agreement Zhan;
3. Standard UART (TTL) interface for direct connection to external MCU serial port or serial peripherals;
4. Optional hardware serial port baud rate 9600 or 38400, default is 9600;
5. Interrupt output prompts;
6. Hardware enable control;
7. Operating distance: 0-30m, class II level;
8. Supply voltage: 3.3V;
9. Module comes with PCB antenna, optional external antenna;
10. Module size: 18.5*9.1*2.0mm
Package Included: 1PC*NRF51822-04 BLE4.0 Wireless Bluetooth Module