Se acquisti più pezzi di questo articolo, potresti risparmiare sulla spedizione!

Riempi il carrello e clicca sul pulsante 'RICHIEDI IL TOTALE AL VENDITORE' o contattaci per offerta personalizzata!


PEAK ELECTRONIC ATLAS DCA55 - Analizzatore semiconduttori

e componenti elettronici discreti

Semiconductor Component Analyzer


PRODOTTO ORIGINALE, ultima VERSIONE

Certificati CE e RoHS

MANUALE d'uso in ITALIANO scaricabile in PDF !!


ATTENZIONE!!!

Si prega di verificare le specifiche dettagliate e i componenti che il tester può analizzare prima di fare l'acquisto !!!

CAUTION!!!

Please check the detailed specifications and components that this tester can analyze before making the purchase !!!


>> Altri strumenti disponibili nel nostro negozio:

ZEN50: Analizzatore ZENER- VDR- TVS - LED

DCA75pro: Analizzatore di Semiconduttori avanzato

SCR100: Analizzatore SCR / TRIAC

ESR70: Misuratore Capacità - ESR- Milliohmmetro

LCR45: Misuratore L-C-R


(** Custodie opzionali disponibili **)


Dotato di display LCD, il DCA55 è in grado di analizzare un vasto numero di componenti elettronici come transistor bipolari, MOSFET, SCR, triac, diodi, reti di diodi, la giunzione dei FET (solo il pin identificato come gate), LED, LED bicolore e RGB. Identifica automaticamente il tipo di componente e la pinout, visualizza informazioni speciali del componente come diodi di protezione e resistenze di shunt, informazioni di parametri come il guadagno e la corrente di dispersione nei transistor, le tensioni di soglia del gate dei MOSFET, le cadute di tensione, ecc. Dispone di spegnimento manuale e automatico (si spegne automaticamente se il dispositivo è inattivo per più di 30 secondi).

Alimentazione a batteria: 12 V (compresa)

Dimensioni: 103x70x20 mm

La confezione comprende: l'analizzatore di componenti, i tre puntali di test e le istruzioni







SPECIFICHE TECNICHE:


  • Corrente di test corto circuito (Isc): min. -5,5 mA ~ max. 5,5 mA
  • Tensione di test circuito aperto (Voc): min. -5,1V ~ max. 5,1V
  • Transistor bipolare (BJT):
    - guadagno misurabile (Hfe): da 4 a 65000
    - precisione del guadagno: circa 3% della lettura - circa 5 Hfe
    - test Vceo: min. 2 V ~ max. 3 V
    - precisione Vbe: -2% -20mV ~ +2% +20 mV
    - VBE per i Darlington (shunted): 0,95V ~ 1,80V (0,75V ~ 1,80V)
    - shunt base-emettitore: 50 kOhm ~ 70 kOhm
    - corrente di test collettore: min. 2,45 mA ~ max. 2,55 mA
    - dispersione: 0,7 mA
  • MOSFET:
    - gate threshold range: min. 0,1V ~ max. 5V
    - precisione threshold: -2%-20mV ~ +2%+20mV
    - corrente di test drain: 2,45 mA ~ 255 mA
    - resistenza di gate: 8 kOhm
    - corrente di test drain: 4,5 mA
    - corrente di test source-drain JFET: min. 0,5 mA ~ max. 5,5 mA
  • SCR/Triac:
    - corrente di test gate: 4,5 mA
    - corrente di test carico: 5 mA
  • Diodi:
    - corrente di test: 5 mA
    - precisione tensione: -2%-20mV ~ +2%+20mV
    - Vf per identificazione LED: min. 1,5 V ~ max. 4 V
    - soglia di corto circuito: 10 Ohm
  • Batteria (compresa):
    - tipo: MN21 / L1028 / GP23A 12V alkaline
    - tensione: min. 7,50 V - tipica 12 V
  • Dimensioni: 103x70x20 mm

DOCUMENTAZIONE E LINK UTILI:



ENGLISH:

FeaturesComponents Supported
  • Connect your component any way round.
  • Automatic part type identification (not the part number).
  • Automatic full pinout identification (only gate of JFETs is identified).
  • Important parameter measurements including:
  • Current gain measurement (hFE) of BJTs.
  • Base-Emitter voltage drops (Vbe) of BJTs.
  • Leakage current of BJTs.
  • Gate threshold (Vgs) of Enhancement mode MOSFETs.
  • Voltage drops (Vf) of PN junctions, diodes, LEDs etc.
  • Distinguishes between germanium and silicon BJTs.
  • Long battery life (alkaline battery included).
  • Includes high quality gold plated hook probes.
  • Includes detailed illustrated user guide.
  • 24 month warranty.
  • NPN/PNP Transistors (BJTs) and Darlingtons.
  • Digital transistors.
  • Enhancement mode MOSFETs.
  • Depletion mode MOSFETs (Vgs not measured).
  • JFETs (only gate identified).
  • Sensitive triacs and thyristors (<5mA trig and hold).
  • Diodes.
  • Diode networks.
  • LEDs.
  • Bi-Colour LEDs (2 and 3 lead types).





Simplicity
There is no on/off switch, power is automatically turned on at the start of an analysis and then automatically turned off if inactive for more than 60 seconds. Each page of displayed information is presented in manageable amounts, with each page being displayed when you want it. If you want to concentrate on the "pinout" page then just select that page, you don't have to see information that you don't need.


Peso conf: 160 gr