* SPEDIZIONE ASSICURATA INCLUSA *


ANALIZZATORE TRIAC E SCR - Thyristor and Triac Tester - Analizer

PEAK ELECTRONIC SCR100

PRODOTTO ORIGINALE, ultima VERSIONE

Certificato CE e RoHS

Manuale in ITALIANO!


ATTENZIONE!!!

Si prega di verificare le specifiche dettagliate e i componenti che il tester può analizzare prima di fare l'acquisto !!!

CAUTION!!!

Please check the detailed specifications and components that this tester can analyze before making the purchase !!!


>> Altri strumenti disponibili nel nostro negozio:

ZEN50: Analizzatore ZENER- VDR- TVS - LED

DCA75pro: Analizzatore di Semiconduttori avanzato

DCA55: Analizzatore di Semiconduttori

ESR70: Misuratore Capacità - ESR- Milliohmmetro

LCR45: Misuratore L-C-R


(** Custodie opzionali disponibili **)


SCR e Triac hanno bisogno di test di prova particolari per essere analizzati in modo efficace

- è lì che il nuovo Atlas SCR 100 entra in gioco.


Il SCR100 può applicare correnti di prova da 100uA fino a 90mA

(con correnti di carico di prova di fino a 100mA) quindi non è controindicato per parti sensibili.

Esso identifica automaticamente il tipo di componente (SCR o TRIAC ),

l'identificazione dei tre piedini e anche caratterizzare la sensibilità.

Misura tutti i modelli/marche di dispositivi che hanno una Gate Trigger Current fino a 90mA.

Questa nuova versione ha una batteria standard AAA alcalina


SPECIFICHE

Identificazione automatica del tipo di componente (tiristore o triac).

Identificazione automatica dei piedini (basta collegare qualsiasi terminale a caso).

Sensibilità progressiva del Gate current (100uA, 1mA, 10mA, 25mA, 35mA, 50mA, 60mA. 75mA, 90mA).

Misure di tensione gate durante il trigger.

Caricare le condizioni di prova di 12 V e 100 mA (a prescindere dalla condizione della batteria).

Durata impulso di test <0.2ms, minimizza possibilità di danni alle parti sensibili.

Identificazione del difetto (giunzioni in cortocircuito, funzionalità difettosa etc).

Alimentazione: batteria 12 V (inclusa)

Dimensioni (mm): 103x70x20 mm

La confezione comprende Peak SCR100 e manuale in inglese.




Documenti Utili:




ENGLISH:
Connect Triacs and Thyristors (SCRs) any way round and perform comprehensive tests
  • Automatic identification of component type (Thyristor or Triac).
  • Automatic lead identification (just connect any way round).
  • Categorisation of gate sensitivity (100µA, 1mA, 10mA, 25mA, 35mA, 50mA, 60mA, 75mA, 90mA).
  • Measures gate voltage during trigger.
  • Load test conditions of 12V and 100mA (regardless of battery condition).
  • Test pulse durations < 0.2mS minimises possibility of damage to sensitive parts.
  • Fault identification (shorted junctions, faulty operation, etc).
  • New 100% SMD construction ensures small size and great reliability.
  • Clear and user-friendly scrollable display.
  • Supplied with fitted Premium micro-hook probes.
  • 24 month warranty.
Example Screenshots

Check your triacs and thyristors, plus identify the pinout automatically

Unique Instrument
A totally unique instrument, offering fast and reliable analysis of most thyristor and triac devices that can operate with gate currents from 100uA up to 90mA and load (latching and holding) currents of 100mA.

Connect Any Way Round
Not only will the Atlas SCR generate the currents necessary to test many thyristors and triacs, it will also identify the type of part under test (thyristor or triac), identify all three leads, categorise the gate sensitivity and measure the gate voltage.

Efficient Power
Test voltages of 12V are generated (at up to 100mA) from the single AAA cell (alkaline cell included). Test conditions are maintained throughout the cell's life.

Gate Drive Capability
The Atlas SCR is suitable for many different varieties of Triac and SCR. It is not suitable however for devices that require a gate current of more than 90mA or a latching/holding current of more than 100mA. High power devices in bolt, disc, capsule, stack and module formats typically require higher currents than the Atlas SCR can produce.


Peso confezione: 152 gr