Se acquisti più pezzi di questo articolo, potresti risparmiare sulla spedizione!

Riempi il carrello e clicca sul pulsante 'RICHIEDI IL TOTALE AL VENDITORE' o contattaci per offerta personalizzata!


MICRO SCHEDA Arduino ATmega32u4 - 16Mhz - 32 KB


s/w compatibile con Arduino Micro / Leonardo : Piccola ma potente!


Upgraded -Powerful ATmega32u4 Arduino board


Ha molta più memoria e I/O pins della Digispark con micro ATTiny85 !


Si connette direttamante sulla porta USB-A del PC per la programmazione
tramite IDE Arduino ( dichiarandola come una 'Micro' o 'Leonardo' )

Alimentazione : 5V ( 4,5- 5,5 V )

Regolatore interno 3,3V per alimentare apparati esterni a 3,3V ( max 800mA)

14 I/O pins ( di cui 5 possono essere PWM out e 6 Analog in )

2 Led che segnalano lo stato di comunicazione TX / RD dedicati



Nota: Il caricamento del programma da IDE avviene automaticamente. Come per le schede Leonardo/Micro originali se il caricamento in alcuni casi non avviene automaticamente, tenere resettato il circuito fino a quando non compare la scritta 'UPLOADING' sul'IDE.

(a seconda dei lotti il circuito stampato può variare leggermente rispetto all'immagine, ma le caratteristiche rimangono invariate)


Prodotti simili in negozio:

Scheda Digispark Tiny85 : https://www.ebay.it/itm/113156057022



The BS Micro is a microcontroller board based on the ATmega32u4.

It has 14 digital input/output pins (of which 5 can be used as PWM outputs and 6 as analog inputs), a 16 MHz crystal oscillator,

and a USB-A connection based on the board.

Except that, there is a 3.3V independent power supply output pin on the board,

which power output doesn't affect MCU-working and depends on the power supply of USB.

Maximum current draw of 3.3V independent power supply output pin is 800 mA.

The board has been burned Arduino bootloader, so it can be compatible with Arduino IDE.

Though the board is small, it has many ports so that it not only has basic functions

but also can be used as mouse and keyboard, has serial port function and can communicate directly with computer.

The most important difference with most of other MCU controlling board is that it needn't be used with programmer.

It can be program with USB directly. It is convenient, stable, and reliable and can save the cost of a programmer.


SPECIFICATIONS:
  • Microcontroller ATmega32u4
  • Operating Voltage : 5V
  • Digital I/O Pins : 14
  • PWM Channels : 5
  • Analog Input Channels : 6
  • Other Peripheral : USB,UART,I2C SPI
  • DC Current per I/O Pin : 40 mA
  • Flash Memory : 32 KB (ATmega32u4) of which 4 KB used by Arduino bootloader
  • SRAM : 2.5 KB (ATmega32u4)
  • EEPROM : 1 KB (ATmega32u4)
  • Clock Speed : 16 MHz
  • Width : 20.3mm
  • Length 30.5mm
  • Kit Weight 4,3g