Se acquisti più pezzi di questo articolo, potresti risparmiare sulla spedizione!
Riempi il carrello e clicca sul pulsante 'RICHIEDI IL TOTALE AL VENDITORE' o contattaci per offerta personalizzata!
Display LCD grafico 128 x 64 (12864B- V2.2) ST7290 controller
Pixel bianchi su retroilluminazione BLU per Arduino , Pic, ARM ecc.
STRIP 20 pin maschio INCLUSO
Alimentazione : 5V (4,5V- 5,5V max)
Controller : ST7920 con set caratteri completo Europa, Cinesi, Cirillico e simboli
Dimensioni 93*70 mm e area leggibile 73*39mm
Il display può venire pilotato sia in modo parallelo (4 o 8 BITS) che in modo seriale ( 3 Fili ) risparmiando I/O
Il display 128 x 64 LCD Module può gestire grafica personalizzata, creare simboli e caratteri utente.
Power-on reset automatico.
Trimmer regolazione del contrasto sul retro del modulo.
Range temper funzionamento : -20° / +70°
Lato Visione : 6h00
Connettore STANDARD 20 pin (interfaccia parallela)
Specifiche LCD: Download
Libreria per uso in parallelo
Dowload libreria per uso seriale SPI
Librerie Arduino.cc : HTTP://playground.arduino.cc/Code/LCD12864
Specifications:
12864 LCD display module can display letters, numbers, Chinese character and graphics. It carries mixed display function on graphics and letters. It can display 128(column)*64(row) dot matrix.
This LCD provides 3 kinds of control interface:8-digit micro-controller interface, 4-digit microcontroller interface and serial interface.
It provides multi-function commands: Display clear, Return home, Display on/off, Cursor on/off, Display character blink, Cursor shift, Display shift, Vertical line scroll and reverse display.
The module is built in with 2M bit Chinese font ROM (CGROM), providing a total of 8192 Chinese font (16 * 16 dot matrix), 16K bit half-width font ROM (HCGROM) ,
providing a total of 126 symbol font (16 * 8 dot matrix) and 64 * 16 bit display RAM (DDRAM). In addition, the drawing display screen provides a drawing area (GDRAM)with 64 * 256 point,
which can be displayed in mix with words.
Parameter:
1. Specification: 128*64; white letter on blue screen
2. Voltage: 5V
3. Operating temperature under normal temperature range: -20~+70°C
4. Storage temperature under normal temperature range: -30~ +80°C
The controller of this LCD is a ST7920
Items | size | unit |
Module volume | 93 X 70 X13 | mm |
View area | 72 X40 | mm |
Point distance | 0.52 X 0.52 | mm |
Point size | 0.48 X0.48 | mm |
Parallel mode interface definition:
Pin number | definition | level | Function specification |
1 | VSS | 0V | Power supply negative |
2 | VDD | +5V | Power supply positive |
3 | V0 | - | Contrast control |
4 | RS | H/L | RS=H:shows data RS=L:controls instruction |
5 | R/W | H/L | R/W+H,E=H,data was read DB7-DB0 R/w=L,E=H=L:the data of DB7-DB0 was written to IR or DR |
6 | E | H/L | Enable pin |
7-14 | DB0-DB7 | H/L | Data line |
15 | PSB | H/L | PSB=H,parallel mode,PSB=L,serial mode |
16 | NC | - | Empty pin |
17 | /RESET | H/L | Reset terminal,low level valid |
18 | Voult | - | Module drives voltage output terminal ( can be left UNCONNECTED) |
19 | A | +5V | Backlight power supply positive |
20 | K | 0V | Backlight power supply negative |
Serial module interface definition:
Pin number | definition | level | Function specification |
1 | VSS | 0V | Power supply negative |
2 | VDD | +5V | Power supply positive |
3 | V0 | - | Contrast control |
4 | CS | H/L | Chip selection terminal,high level valid |
5 | SID | H/L | Serial data input terminal |
6 | CLK | H/L | Serial synchronous clock |
15 | PSB | H/L | PSB=H,parallel mode,PSB=L,serial mode |
17 | /RESET | H/L | Reset terminal,low level valid |
19 | A | +5V | Backlight power supply positive |
20 | K | 0V | Backlight power supply negative |