Se acquisti più pezzi di questo articolo, potresti risparmiare sulla spedizione!

Riempi il carrello e clicca sul pulsante 'RICHIEDI IL TOTALE AL VENDITORE' o contattaci per offerta personalizzata!


SHIELD Wi-Fi PER ARDUINO con MODULO WIFI RN-171 XV



Standard TCP/IP - 802.11 / Alta qualità !


(ANTENNA inclusa)


( Zoccolo XBee compatibile 100%)


Shield per connettere il vostro Arduino alla rete Wi-Fi standard

kit: SHIELD+ MODULO WIFI + ANTENNA


( Datasheet disponibile su richiesta)

Tinysine WIFI shield based on Roving Networks RN-XV module.
It can be separate two parts – Tinysine Bee shield and WiFiBee module.
It provides the bridging from TTL serial port communication to IEEE802.11b/g/n wireless communication. So any device with TTL serial ports can easily be connected with this WIFI shield and controlled and managed remotely through a wireless network. Different kinds of communication protocols and encryption algorithms are integrated with the module.
The Arduino architecture enables you to easily integrate this module into any Arduino based project.
This shield can connect your router and join your local network. It can also be set to AP mode. That means you can control your arduino project point to point by WIFI even without a router!

SPECIFICATIONS
• Based on common 802.15.4
• Ultra low power: 4uA sleep mode, 38mA active
• Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP
• Firmware configurable transmit power: 0dBm to 12dBm
• Hardware interfaces:TTL UART, soft serial
• Host data rate up to 464Kbps over UART
• Supports soft AP and infrastructure networking
• Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
• 3dbi antenna



RN-171XV module Description:

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware.
In other words, if your project is set up for XBee and you want to move it to a standard WiFi network, you can drop this in the same socket without any other new hardware.

The RN-XV module is based upon Roving Networks' robust RN-171 Wi-Fi module and incorporates 802.11 b/g radio, 32 bit processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and analog sensor interface.
The module is pre-loaded with Roving firmware to simplify integration and minimize development time of your application.
In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection.

Features:
Based on common 802.15.4 XBee footprint
Ultra low power: 4uA sleep mode, 38mA active
Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP
Firmware configurable transmit power: 0dBm to 12dBm
Hardware interfaces:TTL UART
Host data rate up to 464Kbps over UART
Supports Adhoc and infrastructure networking
8 general purpose digital I/O
3 analog sensor inputs
Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
Accepts 3.3VDC regulated power supply
Antenna included.

Peso conf: = 45 gr