The
new HD coaxial tester is developed for the on-site installation and
maintenance of HD coaxial camera, having TVI, AHD,CVI. It also provides
many useful functions, such as video display, PTZ control, DC12V output
power, audio test, image generator, VGA video signal input, HDMI1.0
signal input, RS485 data searching, cable testing, LED lamp etc.
Functions:
Video
monitor tester, High-resolution 5.0 inches 800 (RGB) x480 wide viewing
angle display, Viewing angle larger, more intuitive and easy to display
the camera image quality.
Video
monitor tester built-in Pelco-D / P PTZ control protocol, etc. ,
through its own RS485 interface, the user can control the PTZ up, down,
left, right rotation, and adjust one machine zoom, focus, aperture size.
Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section.
Power
the camera with DC12V (1A) power output from the tester. It is helpful
for demo and testing when the power supply is not available.
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
- Enhanced Network Cable Testing
By UTP CABLE TEST port on the meter, you can test the connection of network cable.
Support
VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch
selector to select HDMI or VGA mode. The maximum resolution is 1920 x 1440.
HD TVI video surveillance testing, support 1MP 2MP 3MP 4MP 5MP, 8MP. When TVI signal input, the tester will display HD TVI camera image.
HD video surveillance testing, support AHD 2.0 version, 1MP 2MP 3MP 4MP 5MP, 8MP. When AHD signal input, the tester will display the AHD camera image.
HD CVI video surveillance testing, support 1MP 2MP 3MP 4MP, 8MP. When CVI signal input, the tester will display HD CVI camera image.
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
- The Battery Graphic Display
The
tester has advanced power control and protection circuit, low-power
energy-saving, 4 to 5 hours on a single charge, can be used normally for
12 hours.
Package Included:
- HD coaxial tester
- 5VDC 1A Adapter (with USB cable)
- International Standard 18650 2600ma battery
- BNC cable
- RS485 connector
- Power output conversion cable
- Audio cable
- Lanyard
- Tool bag
- Instruction Manual
Wholesale Welcome!
Contact Us:
- We have always been doing our best to provide the best service and
reliable products for our customer.
- Customers are responsible to check product compatibility issue. If you
have questions about product please feel free to contact us.
Shipping Terms:
- Items will be Shipped on the Same or Next Business day of receiving full
payment.
Term for sale:
- All sales are considered final,
and no refunds or exchanges will be accepted.
- All defective items must be noticed within 7 days after received. Buyers
need to return the defective item for the replacement at his own cost. Item
must be original condition.
- If the order is not found to be defective and is as described there will
be a 20% restocking fee.
Our warranty does not apply to products that have been misused, modified,
repaired or abused by anyone. We reserve the right as final authority on
whether the products should be replaced or refunded.
- Shipping and handling charges are non-refundable at any case.
- Please make sure your shipping Address is Correct. We will only follow
your address listed in the eBay payment for the shipment.
- We have no responsibility for shipping address provided. Due to the
secure reasons, we are not allowed the address change through the email.
- Buyers need to pay S&H again for reshipping the item (except the wrong
buyer address is written by us).
*Please Note: Packages
are NOT shipped on Weekend or Holiday. Normal transit time is 2~5 business days.
We cannot be held responsible for delays caused by carriers. Shipping time is
estimated and not guaranteed.
Thank you