Se acquisti più pezzi di questo articolo, potresti risparmiare sulla spedizione!
Riempi il carrello e clicca sul pulsante 'RICHIEDI IL TOTALE AL VENDITORE' o contattaci per offerta personalizzata!
Programmatore USB Atmel AT AVRISP MkII MK2 AVR ISP Compatibile
Nuova Versione XPII
In-System Programmer Supports AVR Studio 4 - 5 - 6 - 7
ATAVRISP2 Compliant
Programmatore AVRISP MKII per microcontrollori Atmel totalmente compatibile con l'originale Atmel.
Funziona con tutte le versioni di AVR Studio e Atmel Studio.
Dispone di connettore ISP 10 pin, più un connettore adattatore da 10 a 6 pin per collegarsi direttamente al dispositivo target.
Supporta tutti i microcontrollori AVR, ISP, PDI, TPI (ATmega, ATtiny and ATxMega).
Aggiornamento automatico del firmware per dispositivi futuri.
Inclusi nella confezione:
1x AVRISP MKII
1x cavo USB
1x Adattatore 6/10pin
AVR STUDIO 7 free Download :
https://www.microchip.com/mplab/avr-support/atmel-studio-7
AVR STUDIO history + DRIVERS free Download :
https://www.microchip.com/mplab/avr-support/avr-and-sam-downloads-archive
English:
AVR ISP MKII Programmer, fully compatible with original ATAVRISP2 from ATMEL. This programmer works with all versions of AVRStudio and Atmel Studio from 4 to 7. Uses AVR Studio's built-in Jungo USB drivers and Tools menu for programming software. AVR Studio, or Atmel Studio 7, will update the firmware automatically to suit the software version you are using.
Standard 10pin ISP plus 6-pin ISP connector adapter.
Device Support
This AVR programmer supports all AVR devices with ISP, PDI and TPI programming interfaces. This includes all ATmega, ATtiny and ATxMega devices (not JTAG) plus AT90CAN and AT90USB microcontrollers. It also supports AT86RF401/AT89S51/AT89S52 MCUs
Supported Device
Refer to AVR Studio 6, the following devices are supported:
* Supports all the different voltages and speed grade versions of the devices listed in the table above.
ISP connectors TOP VIEW:
Main Features
- Supports all AVR devices with ISP, TPI or PDI interface, and certain 51 Devices
- Supports ATxmega microcontrollers (PDI interface)
- Supported by Studio 4 to 7
- Programs Flash and EEPROM
- Programs Fuses and Lock Bits
- Uses AT AVRISP mkII firmware
- Automatic upgrades to Support Future Devices
- Adjustable ISP programming speed up to 8MHz frequency
- USB 2.0 compliant (full speed, 12Mbps)
- 3 optional cables to target board - 6 and 10-way and flying lead
- Powered from USB bus, does not require external power supply
- Compatible with AT AVR ISP, easy to use, stable and reliable
- Based on AT AVRISP mkII firmware
- Identified as AVRISP mkII in AVRStudio, high speed programming
- Firmware is upgradable to Support Future Devices
- Automatic Upgrade
- Supported software: AVR Studio 6 or WINAVR(GCC) is used as front-end software
- Supports the program files generated by IAR, ICCAVR, CVAVR
Performance
1. High speed programs FLASH , EEPROM, Fuses, and Lock Bit
2. It takes only 2.5S to program a 12K program file with verification (programming speed was set to 1M while the Max speed could be up to 8M)
Connects to PC
1. Uses a USB interface for communication with the front-end software (Probably AVR Studio)
2. Using PDIUSBD12, USB 1.1 (USB 2.0 Full Speed) 12Mbits/second
3. Each USB AVRISP XPII has a unique ID, a PC could connects to several Devices at the same time
Connects to target board
The USB AVRISP XPII connects to the target board through 3 optional cables. Depending on the existed connector on the target board, the cable has to be changed accordingly.
1. Sandard 6-pin ISP Connector, Using 6-pin ISP cable
2. Standard 10-pin ISP Connector, Using 6-pin to 10-pin ISP cable
3. Custom ISP Connector, Using 6-wire multicolour custom connector cable
Powered from USB bus
1. Draws power from the USB bus, No need for Additional Power Supply
2. The target board should be powered from Another Power Supply
Package Contains:
1. USB AVRISP MKII
2. USB Cable
3. 6-pin to 10-pin ISP cable
Peso confezione: 87 gr
