DHT22 AM2302 ESP8266 ESP-01/01S Temperature Humidity Sensor Wifi Module Wireless

ESP-01 ESP-01S DHT22 Temperature Humidity Sensor
Introduction
This is a calibrated digital temperature and humidity sensor for detecting ambient temperature and humidity, using DHT22 (AM2302), standard single bus interface.
Compared with DHT11, it has higher precision and larger range.
Can be used with the ESP-01/ESP-01S WIFI module and can replace the SHT11 SHT15.
parameter
temperature:
Resolution: 0.1 ° C
Accuracy: ±0.5 °C
Detection range: -40 ° C ~ 80 ° C
humidity:
Resolution: 0.1% RH
Accuracy: ±2%RH (25°C)
Detection range: 0%RH ~ 99.9%RH
Working voltage: 3.3V ~ 5.5 V
Recommended storage environment:
Temperature: 10 ° C ~ 40 ° C
Humidity: 60% RH or less
application:
Weather stations, humidity regulators, test and inspection equipment, etc.
Port wiring diagram:
 
ESP8266 ESP-01S
Description:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125℃
Wireless Network Mode:station/softAP/SoftAP+station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/HTTP/FTP
Package Included:
1*ESP-01 ESP-01S DHT22 Temperature Humidity Sensor
1*ESP8266 ESP-01S Wifi WirelessTransmission Module
 
ESP-01/01S Adapter
Description:
This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module.
As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01 module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Last but not least, we added a 0.1µF decoupling capacitor so the ESP-01 will always run smoothly and without a hitch.

Connection:

URAT        Adapter
3.3V           VCC
3.3V           CH-PD
TX               RX
RX              TX
Choose both NL CR 15200 baud rate

 
Package Included:
1 X ESP-01 Breakout Board Breadboard Adapter
2 X 4P male header
 
ESP-01 Adapter#1
Description:
A adapter module for ESP-01 Wi-Fi module. 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.
Also, the item can be used with Arduino UNO R3 or compatible board
Features:
Working voltage: 4.5~5.5V (On-board 3.3V LDO Regulator)
Working current: 0-240mA

Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.

International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.

Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.

 

  For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the " Ask the seller a question" link on eBay.
  We expect positive feedback and 5 scores DSR  from you. 

  1. We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
  2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
  3.  Please include your eBay ID and item number with any email requests.

 

DataCaciques