Link G4 X Monsoon X ECU Ford RS Cosworth YB engine loom Kit Wiring - Motorsport
At BHP we have spent a long time perfecting the installation of Link ECU's into Cosworth YB Powered Cars including the Sierra & Escort RS Cosworth and a multitude of RWD cars (Mk1/2 Escort, Capri's, Anglia's plus some very odd vehicles)
We have now put together definitive kits to bring your YB up to date with a new Link G4+ ECU. The ECU will run individual injector and ignition trim, plus a selection of optional motorsport features like Launch control and Anti Lag. The Link ECU will also come with much better engine protection, which is what is very lacking in the standard Weber, thats pretty much why the engine becomes unreliable when tuned .
The Cosworth Loom kit includes the following: Link G4 X Monsoon X ECU With on Board 4 Bar Map Sensor, Base Map, Full engine loom, 4x BOSCH 1000cc Injectors Mulithole Injectors With Height Adaptors , 4x Honda K20 coil's with mounting brackets, Distributor cover & Boost Controller.
The Kit we are selling is a comprehensive kit and allows you to sell the following items (Dependant on ECU) to help fund the new install:
ECU, Loom, Ignition Amp & bracket, Ignition Leads, Injectors, MAP Sensor & bracket & AMAL Valve. This can add up to quite a lot of money nowadays making this kit very cost effective.
Link G4X Monsoon X ECU Specification:
More features, more powerful.
The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to its G4+ predecessor, along with advancements such as single precision floating point format fuel tables, better resolution within ignition timing and faster communications. These upgrades make the G4X Monsoon a true powerhouse in a small shell.
G4X features 512 megabytes of logging at 32bit using up to 250 channels, each limited to up to 1kHz per channel (by the Operating System), with a maximum of 100kHz.
With the MonsoonX you have all the tuning capabilities of the AtomX, but you can also choose to run some of the following features: Launch Control, Anti-lag, VVT Control and Closed Loop Boost Control. It also comes with a built in 4Bar MAP sensor further reducing installation cost.
Note: The MonsoonX will run any of the above features, but it cannot run them all at once. The number of features you can run is dependent on how many of the limited Inputs and Outputs each feature needs.
The MonsoonX will control up to 2 rotors or 4 cylinders with sequential injection and direct spark. This makes it ideal for naturally aspirated or turbocharged engines that just need a retune and one or two extra features, so you don’t need to jump up to one of our higher-level ECUs.
Engine Configurations
Fueling Adjustments
Ignition Adjustments
Limits
Triggering
Motor-Sport Features
Communications
Auxiliary Output Options
Processing
Inputs/Output
Analog Inputs
Digital Inputs
Programmable Math Processing
Boost Control
Idle Control
Environment
Physical
PCLink
Package Contents
Manufacturing Standard
The ECU also features the ability to run a windows 10 tablet (£125 Amazon) for tuning, diagnostics and just to use as a Dash. The CAN output can run a standard ISO diagnostic port just like a modern car.
Link ECUs also come with a LIFETIME Warranty!
Cosworth Engine Loom Specification:
AVSS Automotive thin-wall wire used throughout and genuine TYCO and DELPHI Connectors.
Loom will be supplied braided and labeled as per the photo and compete with high quality 60mm bulkhead grommet. (Heat-shrink Finish Available if Preferred)
Loom comes standard with:
All looms are made to order and as such can have extra wires added cost is £25 per wire.
Extras can Include:
Drive By Wire Throttle (E-Throttle) (Xtreme)
Wideband Lambda Sensor (Fury and Thunder)
Knock Sensor (Storm, Xtreme, Fury, Thunder)
Fuel Pressure
Sump Pressure
and many more possibilities
Looms are made in batches and can take up to 10 working Days to complete.
You will need to contact us once purchased to ensure we have correct configuration noted for your loom.
Please contact us to discuss any other technicalities we have not covered.
We also have a Kit based around the Link FURY ECU which can include Drive by wire throttle which maximises engine torque, enables speed limit and cruise control, and loads of additional sensors can be added for both precise control and safety. Due to the specification of this kit we run this with one of our project specialist so contact us for more information.
Fitting and Mapping also available! - Call us to discuss.
0% interest Free Finance Available!
All Of Our Items Are Now Shipped With DHL, No Matter How Big Or Small. This Is To Ensure The Delivery Of Your Item Through This Difficult Period.
Any Items That Are Out Of Stock Or have Extended Lead Times, May Take Slightly Longer Than Normal.
Thanks You,
BHP